Echometer

wzwqoo·Echometer·hardware/v4.kicad_pcb

Echometer PCB layout, top view — open source board by wzwqoo

About the Echometer PCB

Echometer is an open source PCB design by wzwqoo, published on GitHub. It is a 4-layer board measuring 36.6 × 100 mm, with 74 components from 39 distinct parts.

Other key parts include the SPU0410LR5H-QB, TL972IDR, OPA838IDBVR, adcs7476aimfx/nopb and TP4056. By type, the board carries 30 capacitors, 25 resistors, 10 ICs, 5 connectors, 3 diodes and 1 inductor.

From the project

KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py`.

KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py`.

The schematic is split over two sheets: v4.kicadsch (root) and MCU.kicadsch (everything — front end, ADC, power, module headers).

Knowles SPU0410LR5H-QB, one fitted. An analog MEMS mic with usable response through the target bat band; its raw output is small — tens of millivolts for a loud, close call — so it must be amplified and biased into the ADC's input range before sampling.

Main components on the Echometer

Echometer bill of materials (BOM)

74 components, 39 distinct parts.

QtyPartRefs
1
SPU0410LR5H-QB
Syntiant
U1
1
TL972IDR
TI
U2
1
OPA838IDBVR
TI
U3
1
adcs7476aimfx/nopb
TI(德州仪器)
U4
1
TP4056
U5
1
DW01
U6
1
FS8205A
U7
1
MT3608
U8
1
74HC4053D_653
U9
1
TPS74801DRCR
U10
1
USB_B_Micro
J1
1
Conn_01x06_Socket
J5
1
Conn_01x02_Socket
J6
2
Conn_01x22_Socket
J11, J12
1
RED
D1
1
GREEN
D2
1
D_Schottky SS34
D3
1
4.7uH
L1
4
22uF
C1, C10, C26, C29
5
10nF
YAGEO
C2, C4, C12, C13, C17
Show 19 more
QtyPartRefs
5
10uF
C5, C18, C19, C24, C30
11
100nF
C6, C7, C8, C9, C11, C20, C22, C23 +3
2
27pF
YAGEO
C14, C15
1
22nF
YAGEO
C16
1
2.2uF
YAGEO
C21
1
470uF
YAGEO
C28
3
10K
YAGEO
R1, R2, R9
7
1K
YAGEO
R3, R4, R5, R6, R8, R10, R12
1
1.2k
R7
1
31K2
R11
1
33K
YAGEO
R13
4
100
YAGEO
R15, R17, R18, R20
1
22
R16
1
0R
R19
1
150K
R21
1
19.1K
R22
2
22K
YAGEO
R23, R25
1
6K8
YAGEO
R24
1
3K6
YAGEO
R26

Echometer design files

The KiCad project lives in the wzwqoo/Echometer repository on GitHub; these links point at the commit this page was built from.

Echometer: common questions

How big is the Echometer PCB?

The Echometer measures 36.6 × 100 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Echometer?

74 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the Echometer design files?

From the wzwqoo/Echometer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Echometer design in my own project?

The repository has no license, so all rights stay with wzwqoo. Use it as a reference, and ask the author before reusing the design.