Multi rail linear power supply
XAffanX·multi-rail-linear-power-supply·hardware/LinearPowerSupply.kicad_pcb
About the Multi rail linear power supply PCB
Multi rail linear power supply is an open source PCB design by XAffanX, published on GitHub. It is a 2-layer board measuring 100 × 76.3 mm, with 26 components from 14 distinct parts.
Other key parts include the LM7812_TO220, LM7912_TO220 and LM317_TO-220. By type, the board carries 12 capacitors, 6 connectors, 5 ICs, 2 resistors and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
KiCad design for a bench supply with +/-12 V fixed rails and a 1.25-27.85 V adjustable output (LM7812/LM7912/LM317). Schematic and PCB in progress.
A bench power supply providing fixed +12 V and −12 V rails plus a variable 1.25–27.85 V output, designed in KiCad 10. Schematic capture and PCB work in progress.
Analogue bench work needs a split supply: op-amp circuits want symmetric ±12 V, while general prototyping wants an adjustable rail. This design produces all three from a single transformer input using linear regulators — chosen over a switching topology for low output noise, which matters when the supply is feeding measurement and audio-band circuits.

Main components on the Multi rail linear power supply
Multi rail linear power supply bill of materials (BOM)
26 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM7812_TO220 | TO-220-3_Vertical | U1, U2 |
| 2 | LM7912_TO220 | TO-220-3_Vertical | U3, U4 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U5 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 2 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2, J3 |
| 1 | FAN | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ON/OFF1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Volt-Meter | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | KBU6M | Diode_Bridge_Vishay_KBU | D1 |
| 5 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6 |
| 2 | 2200uF | CP_Radial_D12.5mm_P5.00mm | C7, C10 |
| 5 | 10uF | CP_Radial_D5.0mm_P2.00mm | C8, C9, C11, C12, C13 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | R2 |
Multi rail linear power supply design files
The KiCad project lives in the XAffanX/multi-rail-linear-power-supply repository on GitHub; these links point at the commit this page was built from.
Multi rail linear power supply: common questions
How big is the Multi rail linear power supply PCB?
The Multi rail linear power supply measures 100 × 76.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multi rail linear power supply?
26 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Multi rail linear power supply design files?
From the XAffanX/multi-rail-linear-power-supply repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Multi rail linear power supply design in my own project?
The repository has no license, so all rights stay with XAffanX. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k