6 open source boards using the LM7912_TO220
Real designs built with the LM7912_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LatheDisplay
eshazen
85.7 × 63.5 mm36 parts2LNo license0Multi rail linear power supply
XAffanX
100 × 76.3 mm26 parts2LNo license0Synth psu 2
PurestSeaSalt
160 × 80 mm28 parts2LNo license0FUENTE SIMETRICA DE 12V
MyCloudExample
100 × 50 mm17 parts2LNo license1GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1ModulinPowerSupply
ConDarth
25.4 × 177.8 mm18 parts2LNo license0
How designs wire the LM7912_TO220
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LM7912_TO220 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 4 of 6 designs, most often 4.7 mF (then 100 nF).
- The VO pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: -15V 50% · a signal 50% |
|
| VOpin 3 | Connected to: -12V 83% · a signal 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FUENTE SIMETRICA DE 12V by MyCloudExample, GIMIX intelligent 3 port Serial by roberto314, ModulinPowerSupply by ConDarth and LatheDisplay by eshazen.
The LM7912_TO220 in open source designs
The gallery holds 6 open source boards using the LM7912_TO220 from 6 GitHub repositories; a typical one measures about 100 × 78.2 mm and carries around 27 components.
100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is GIMIX intelligent 3 port Serial by roberto314.
Parts used alongside the LM7912_TO220
Microcontrollers on boards using the LM7912_TO220
What boards using the LM7912_TO220 are built for
LM7912_TO220: common questions
Where can I find a LM7912_TO220 reference design?
Each of the 6 boards on this page is a real design using the LM7912_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM7912_TO220 VI pin connected?
The VI pin has a capacitor to GND on 4 of 6 designs, most often 4.7 mF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the LM7912_TO220.
What decoupling capacitors do designs use on the LM7912_TO220 VO pin?
The VO pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LM7912_TO220.
Which microcontrollers do boards using the LM7912_TO220 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the LM7912_TO220?
The median is 100 × 78.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM7912_TO220?
By GitHub stars, GIMIX intelligent 3 port Serial by roberto314, with 1 stars.
Can I simulate one of these boards using the LM7912_TO220 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.