Weather station v3s
About the Weather station v3s PCB
Weather station v3s is an open source PCB design by xfdr0805, published on GitHub. It is a 2-layer board measuring 91.3 × 60.7 mm, with 155 components from 62 distinct parts.
Other key parts include the V3S, W25Q128JVS, TF_Card, CH340E and SY7201/SY7208ABC/LP3307. By type, the board carries 64 resistors, 52 capacitors, 12 connectors, 10 ICs, 4 switches and 4 diodes.
From the project
kicad_projects
Main components on the Weather station v3s
Weather station v3s bill of materials (BOM)
155 components, 62 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | V3S | V3S_LQFP-128_14x14_Pitch0.4mm | U1 |
| 1 | W25Q128JVS | WSON-8_8x6mm | U2 |
| 1 | TF_Card | TF_Slot_Mini | U3 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | SY7201/SY7208ABC/LP3307 | SOT-23-6_Handsoldering | U5 |
| 1 | NS2009 | MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | RTL8723BS_Module | RTL8723BS_Module | U7 |
| 1 | EA3036 | QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U8 |
| 1 | XC6206PxxxMR | SOT-23 | U9 |
| 1 | LPA4890MSF | SOP-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | 32.768KHz | Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | RJ45_Bel_SI-60062-F | RJ45_Bel_SI-60062-F | J1 |
| 1 | UART0 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | UART1 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | UART2 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | I2C0 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 2 | LCD_RGB_40P | Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J6, J7 |
| 1 | DHT | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 2 | USB_C | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J10, J13 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Audio | JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J11 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J12 |
| 1 | Antenna_Chip | Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | CR2032 | Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles | BT1 |
| 1 | 2A | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | VOL+ | SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | VOL- | SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | SELECT | SW_SPST_CK_RS282G05A3 | SW4 |
| 1 | START | SW_SPST_CK_RS282G05A3 | SW5 |
| 1 | 1N5819 | D_SOD-323 | D1 |
| 3 | LED_Small | LED_0603_1608Metric | D3, D4, D5 |
| 1 | 2.2uH | L_1008_2520Metric | L1 |
| 3 | 2.2uH | L_Taiyo-Yuden_MD-5050 | L2, L3, L4 |
| 12 | 0.1uF | C_0603_1608Metric | C1, C2, C7, C8, C11, C14, C26, C27 +4 |
| 5 | 10uF | C_0603_1608Metric | C3, C15, C16, C19, C49 |
| 2 | 4.7uF | C_0603_1608Metric | C4, C6 |
| 17 | 1uF | C_0603_1608Metric | C5, C17, C20, C21, C22, C23, C24, C25 +9 |
| 2 | 10pF | C_0603_1608Metric | C9, C10 |
| 2 | 12pF | C_0603_1608Metric | C12, C13 |
| 1 | 33pF | C_0603_1608Metric | C18 |
| 8 | 10uF | C_0805_2012Metric | C28, C30, C31, C33, C34, C36, C41, C45 |
| 3 | 18pF | C_0603_1608Metric | C29, C32, C40 |
| 2 | 200K | R_0603_1608Metric | R1, R53 |
| 4 | 49.9 | R_0603_1608Metric | R2, R5, R6, R7 |
| 5 | 0R | R_0603_1608Metric | R3, R4, R24, R26, R35 |
| 1 | 33R | R_0603_1608Metric | R8 |
| 3 | 1K | R_0603_1608Metric | R9, R10, R21 |
| 1 | 6K 1% | R_0603_1608Metric | R11 |
| 25 | 10K | R_0603_1608Metric | R12, R13, R14, R16, R17, R18, R19, R20 +17 |
| 1 | 240R | R_0603_1608Metric | R15 |
| 1 | 120K | R_0603_1608Metric | R25 |
| 1 | 1M | R_0603_1608Metric | R28 |
| 1 | 4.7K | R_0603_1608Metric | R29 |
| 4 | 2K | R_0603_1608Metric | R34, R49, R50, R63 |
| 5 | 100K | R_0603_1608Metric | R36, R38, R45, R52, R54 |
| 1 | 6.8K | R_0603_1608Metric | R46 |
| 1 | 8.2K | R_0603_1608Metric | R47 |
| 1 | 82.5K | R_0603_1608Metric | R51 |
| 1 | 11K | R_0603_1608Metric | R55 |
| 1 | 680K | R_0603_1608Metric | R60 |
| 1 | 150K | R_0603_1608Metric | R61 |
| 4 | 20K | R_0603_1608Metric | R64, R65, R66, R67 |
Weather station v3s design files
The KiCad project lives in the xfdr0805/kicad_projects repository on GitHub; these links point at the commit this page was built from.
Weather station v3s: common questions
How big is the Weather station v3s PCB?
The Weather station v3s measures 91.3 × 60.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Weather station v3s?
155 components, from 62 distinct parts. The full bill of materials is listed on this page.
Where can I download the Weather station v3s design files?
From the xfdr0805/kicad_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Weather station v3s design in my own project?
The repository has no license, so all rights stay with xfdr0805. Use it as a reference, and ask the author before reusing the design.
