5 open source boards using the EA3036
Real designs built with the EA3036, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
AutoPilotPi-Hardware
AutopilotPi
29 × 52 mm97 parts4LGPL-3.035Coonix
TreeNewbeer
95 × 85 mm164 parts2LNo license4ESP32
Network player
naguirre
30.1 × 66.6 mm72 parts4LMIT3Weather station v3s
xfdr0805
91.3 × 60.7 mm155 parts2LNo license0ESP32
Network player
naguirre
30.1 × 66.6 mm72 parts4LNo license0
How designs wire the EA3036
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the EA3036 connects to, and the resistors, capacitors and other passives placed on it.
- The FB3 pin has a resistor to GND on 5 of 5 designs, most often 15 kΩ (then 150 kΩ).
- The FB2 pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ (then 15 kΩ).
- The LX2 pin has a inductor on 5 of 5 designs, most often 2.2 µH.
- The VIN2 pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND3pin 1 | Connected to: GND 100% | — |
| FB3pin 2 | Connected to: Signal 100% |
|
| FB2pin 3 | Connected to: Signal 100% |
|
| GND2pin 4, 5 | Connected to: GND 100% | — |
| LX2pin 6 | Connected to: Signal 100% |
|
| VIN2pin 7 | Connected to: 5V 100% |
|
| EN2pin 8 | Connected to: 5V 100% | — |
| EN1pin 9 | Connected to: 5V 100% | — |
| VIN1pin 10 | Connected to: 5V 100% |
|
| LX1pin 11 | Connected to: Signal 100% |
|
| GND1pin 12, 13 | Connected to: GND 100% | — |
| FB1pin 14 | Connected to: Signal 100% |
|
| AGNDpin 15, 17 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
| EN3pin 18 | Connected to: 5V 100% | — |
| VIN3pin 19 | Connected to: 5V 100% |
|
| LX3pin 20 | Connected to: Signal 100% |
|
| EPpin 21 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AutoPilotPi-Hardware by AutopilotPi, Coonix by TreeNewbeer, Network player by naguirre and Network player by naguirre.
The EA3036 in open source designs
The gallery holds 5 open source boards using the EA3036 from 5 GitHub repositories; a typical one measures about 30.1 × 66.6 mm and carries around 97 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is AutoPilotPi-Hardware by AutopilotPi.
Parts used alongside the EA3036
What boards using the EA3036 are built for
EA3036: common questions
Where can I find a EA3036 reference design?
Each of the 5 boards on this page is a real design using the EA3036. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the EA3036 FB3 pin?
The FB3 pin has a resistor to GND on 5 of 5 designs, most often 15 kΩ (then 150 kΩ). Counted from the KiCad layouts of 5 open source designs using the EA3036.
What resistor goes on the EA3036 FB2 pin?
The FB2 pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ (then 15 kΩ). Counted from the KiCad layouts of 5 open source designs using the EA3036.
How is the EA3036 LX2 pin connected?
The LX2 pin has a inductor on 5 of 5 designs, most often 2.2 µH. Counted from the KiCad layouts of 5 open source designs using the EA3036.
What parts are used alongside the EA3036?
The ESP32-C3-MINI-1, F1C100s and W25N01GVZEIG appear in the most repositories here.
Which microcontrollers do boards using the EA3036 use?
Most are built on ESP32 (2) and FPGA (1).
How big is a typical board using the EA3036?
The median is 30.1 × 66.6 mm, and 40% are two-layer designs.
What is the most popular open source board using the EA3036?
By GitHub stars, AutoPilotPi-Hardware by AutopilotPi, with 35 stars.
Can I simulate one of these boards using the EA3036 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.