3 open source boards using the V3S
Real designs built with the V3S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FunKey-S-Hardware
FunKey-Project
42 × 32 mm212 partsCC-BY-4.0123
Sbc allwinner v3s
vd-rd
66 × 42 mm155 parts4LNo license22
Orca one
Finn254254
73 × 66 mm96 parts4LCERN-OHL-S-2.00
The V3S in open source designs
The gallery holds 3 open source boards using the V3S from 3 GitHub repositories; a typical one measures about 66 × 42 mm and carries around 155 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is FunKey-S-Hardware by FunKey-Project.
Parts used alongside the V3S
What boards using the V3S are built for
V3S: common questions
Where can I find a V3S reference design?
Each of the 3 boards on this page is a real design using the V3S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the V3S?
The median is 66 × 42 mm, and 0% are two-layer designs.
What is the most popular open source board using the V3S?
By GitHub stars, FunKey-S-Hardware by FunKey-Project, with 123 stars.
Can I simulate one of these boards using the V3S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.