Relay8

YORROY123·kicad-scripted-pcb·boards/relay8/relay8.kicad_pcb

Relay8 PCB layout, top view — open source ESP32 board by YORROY123

About the Relay8 PCB

Relay8 is an open source ESP32 PCB design by YORROY123, published on GitHub under the MIT license. It is a 2-layer board measuring 232 × 110 mm, with 65 components from 36 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the LP38693MP-3.3 and ULN2803A. By type, the board carries 16 resistors, 12 diodes, 11 connectors, 8 relays, 8 capacitors and 3 ICs.

From the project

Three KiCad 10 PCBs designed entirely as Python code with layered verification

Three KiCad 10 boards designed entirely as code: Python scripts produce the schematic, the PCB placement, the routing (via freerouting) and the copper pours, and each board rebuilds from scratch with one command. The KiCad GUI is never opened.

The point is verification. Every build runs several independent checks, because each one is blind to errors the others catch. Some of those errors turned up while these boards were being built and are listed below.

Relay8, from the project README
From the project README

Main components on the Relay8

Relay8 bill of materials (BOM)

65 components, 36 distinct parts.

QtyPartRefs
1
ESP32-C3-WROOM-02-N4
U1
1
LP38693MP-3.3
U2
1
ULN2803A
U3
1
AO3401A
Q1
1
USB-C
J1
1
UART
J2
1
CH1
J11
1
CH2
J12
1
CH3
J13
1
CH4
J14
1
CH5
J15
1
CH6
J16
1
CH7
J17
1
CH8
J18
1
MAINS IN
J20
1
T8A 250V
F1
1
T1A 250V
F2
8
SRD-05VDC-SL-C
K1, K2, K3, K4, K5, K6, K7, K8
1
HLK-10M05
PS1
1
14D431K
RV1
Show 16 more
QtyPartRefs
1
RESET
SW1
1
BOOT
SW2
1
USBLC6-2SC6
D1
1
GREEN
D3
2
SS34
D4, D5
8
RED
D11, D12, D13, D14, D15, D16, D17, D18
3
1uF
C1, C4, C8
1
10uF
C2
2
100nF
C3, C6
1
100uF
C5
1
10nF
C7
2
5.1k
R1, R2
4
10k
R3, R4, R5, R6
1
220
R8
1
100k
R9
8
1k
R11, R12, R13, R14, R15, R16, R17, R18

Relay8 design files

The KiCad project lives in the YORROY123/kicad-scripted-pcb repository on GitHub; these links point at the commit this page was built from.

Relay8: common questions

What microcontroller does the Relay8 use?

The Relay8 is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the Relay8 PCB?

The Relay8 measures 232 × 110 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Relay8?

65 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the Relay8 design files?

From the YORROY123/kicad-scripted-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Relay8 design in my own project?

Yes, under the terms of its MIT license, which YORROY123 chose for the repository.

Can I test firmware for the Relay8 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in kicad-scripted-pcb

Similar boards