Dtk-386-replica
youxiaojie·dtk-386-replica·kicad/UMC-AT.kicad_pcb
About the Dtk-386-replica PCB
Dtk-386-replica is an open source PCB design by youxiaojie, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 175 × 220.4 mm, with 173 components from 48 distinct parts.
Other key parts include the 74LS00, 80386, 80387, 82C491 and AV9107. By type, the board carries 41 resistors, 27 capacitors, 21 ICs, 8 connectors, 6 jumpers and 5 inductors.
From the project
This is an open source replica of the DTK PEM-0039U, and its main target was to reverse engineer the pinout and functionality of the UMC 82C491 chipset, for which there are no datasheets online.
This is an open source replica of the DTK PEM-0039U, and its main target was to reverse engineer the pinout and functionality of the UMC 82C491 chipset, for which there are no datasheets online.
Theoretically, it should be fully functional if one were to assemble this, but I do not guarantee there won't be bugs from my side or from the original designers which made it 30+ years ago. The aim was to 100% reproduce the original PCB, with all the original components and footprints, despite the questionable trace routing in certain places.
Main components on the Dtk-386-replica
Dtk-386-replica bill of materials (BOM)
173 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS00 | DIP-14_W7.62mm | U1 |
| 1 | 80386 | PGA-132 | U2 |
| 1 | 80387 | PGA-68 | U3 |
| 1 | 82C491 | QFP-208 | U4 |
| 1 | AV9107 | DIP-8_W7.62mm | U5 |
| 5 | CY62256-70PC | DIP-28_W7.62mm | U6, U10, U11, U12, U13 |
| 1 | 4069 | DIP-14_W7.62mm | U9 |
| 2 | 74LS244 | DIP-20_W7.62mm | U14, U21 |
| 3 | 74LS245 | DIP-20_W7.62mm | U15, U16, U17 |
| 1 | 27C512 | DIP-28_W15.24mm | U18 |
| 1 | ~ | DIP-40_W15.24mm | U19 |
| 1 | 82C493 | QFP-100 | U20 |
| 1 | Cx87DLC | LQFP-80_14x14mm_P0.65mm | U22 |
| 1 | Am386DX | QFP-132 | U23 |
| 2 | 2N3904 | PinSocket_1x03_P2.54mm_Vertical | Q1, Q3 |
| 1 | 2N3906 | PinSocket_1x03_P2.54mm_Vertical | Q2 |
| 1 | 32.768KHz | Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 14.318MHz | Crystal_HC49-U_Horizontal | Y2 |
| 1 | KEY LOCK | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | RESET | PinHeader_1x02_P2.54mm_Vertical | J3 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TURBO SW | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | TURBO LED | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | V+ | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | ~ | ATPWR | J7 |
| 1 | ~ | KB_DIN5 | J8 |
| 1 | SPEAKER | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 25 | 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | BC1, BC2, BC3, BC4, BC5, BC6, BC7, BC8 +17 |
| 1 | 3.6V NiCd | BATT | BT1 |
| 5 | 1N4148 | D_DO-35_SOD27_P10.16mm_Horizontal | CR1, CR2, CR3, CR4, CR5 |
| 1 | 1A | L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | F1 |
| 5 | Bus_ISA_16bit | ISA16 | ISA1, ISA3, ISA4, ISA5, ISA6 |
| 1 | Bus_ISA_8bit | ISA8 | ISA2 |
| 3 | ~ | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP8 |
| 2 | ~ | PinHeader_1x02_P2.54mm_Vertical | JP3, JP4 |
| 1 | 387 PRESENT | PinHeader_1x03_P2.54mm_Vertical | JP6 |
| 9 | 4.7K | R_Array_SIP9 | RP1, RP5, RP6, RP7, RP8, RP9, RP10, RP13 +1 |
| 5 | 4.7K | R_Array_SIP8 | RP2, RP3, RP4, RP11, RP12 |
| 8 | ~ | PinSocket_1x30_P2.54mm_Vertical | SIM1, SIM2, SIM3, SIM4, SIM5, SIM6, SIM7, SIM8 |
| 5 | FerriteBead | L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L1, L2, L3, L4, L5 |
| 12 | C | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5, C18, C19, C20 +4 |
| 2 | 10pF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C6, C7 |
| 3 | C | C_Disc_D4.3mm_W1.9mm_P5.00mm | C8, C10, C11 |
| 8 | 10uF | CP_Radial_D5.0mm_P2.50mm | C9, C13, C14, C15, C25, C26, C27, C28 |
| 2 | C | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C12, C16 |
| 32 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R4, R5, R6, R7, R8, R9 +24 |
| 1 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R27 |
| 7 | 33R | R_Array_SIP8 | RN1, RN2, RN3, RN4, RN5, RN6, RN7 |
Dtk-386-replica design files
The KiCad project lives in the youxiaojie/dtk-386-replica repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/UMC-AT.kicad_pcb
- Schematickicad/UMC-AT.kicad_sch
Dtk-386-replica: common questions
How big is the Dtk-386-replica PCB?
The Dtk-386-replica measures 175 × 220.4 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Dtk-386-replica?
173 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dtk-386-replica design files?
From the youxiaojie/dtk-386-replica repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dtk-386-replica design in my own project?
Yes, under the terms of its GPL-3.0 license, which youxiaojie chose for the repository.