JellyTracker V0.5.0
YozoraKurage·YozoLab-JellyTracker·JellyTracker_V0.5.0/KiCAD/JellyTracker_V0.5.0.kicad_pcb
About the JellyTracker V0.5.0 PCB
JellyTracker V0.5.0 is an open source ESP32 PCB design by YozoraKurage, published on GitHub under the MIT license. It is a 2-layer board measuring 35.6 × 40.1 mm, with 13 components from 9 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the ME6211C33M5G-N. By type, the board carries 4 resistors, 2 ICs, 2 connectors, 2 switches, 2 capacitors and 1 diode.
From the project
AUXトラッカーとして、LSMModule-V0.1.0が利用可能です > LSMModuleとNi-MH3.3V-Moduleを利用してNi-MH一本での運用が可能です。\ > JTV0.5.0はそのために作成されました
Main components on the JellyTracker V0.5.0
JellyTracker V0.5.0 bill of materials (BOM)
13 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ME6211C33M5G-N | SOT-23-5 | U1 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U5 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C50137 JST-PH 2.0 | JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J7 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | CUS10S30 CUS10S30n | D_SOD-323 | D2 |
| 2 | C28323 1μF | C_0805_2012Metric | C6, C7 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 10K 10k | R_0603_1608Metric | R3, R4 |
JellyTracker V0.5.0 design files
The KiCad project lives in the YozoraKurage/YozoLab-JellyTracker repository on GitHub; these links point at the commit this page was built from.
JellyTracker V0.5.0: common questions
What microcontroller does the JellyTracker V0.5.0 use?
The JellyTracker V0.5.0 is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the JellyTracker V0.5.0 PCB?
The JellyTracker V0.5.0 measures 35.6 × 40.1 mm, has 2 copper layers and is 1 mm thick.
How many components are on the JellyTracker V0.5.0?
13 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the JellyTracker V0.5.0 design files?
From the YozoraKurage/YozoLab-JellyTracker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the JellyTracker V0.5.0 design in my own project?
Yes, under the terms of its MIT license, which YozoraKurage chose for the repository.
Can I test firmware for the JellyTracker V0.5.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in YozoLab-JellyTracker
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k