ESP8266-IMU-Node
yunus-kunduz·ESP8266-IMU-Node·ESP8266-IMU-Node/ESP8266-IMU-Node.kicad_pcb
About the ESP8266-IMU-Node PCB
ESP8266-IMU-Node is an open source ESP8266 PCB design by yunus-kunduz, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 52 mm, with 24 components from 16 distinct parts.
Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the MPU-6050 and MCP1640x-xCHY. By type, the board carries 11 resistors, 5 capacitors, 3 ICs, 2 diodes, 1 battery holder and 1 switch.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Custom PCB design for a Wireless IMU Node using ESP8266 & MPU6050. Features battery management and boost converter circuits (KiCad).
This project is a battery-powered, compact, and independent Wireless Motion Sensor node designed for IoT (Internet of Things) applications.
The board reads acceleration and gyroscope data through the onboard MPU-6050 sensor and transmits it to a Wi-Fi network (MQTT, TCP/UDP, etc.) via the ESP8266 (ESP-12F) module. It features an internal Boost Converter circuit to allow operation from a single battery cell.

Main components on the ESP8266-IMU-Node
ESP8266-IMU-Node bill of materials (BOM)
24 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12F | ESP-12E | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | MCP1640x-xCHY | SOT-23-6 | U3 |
| 1 | Battery_Cell | BatteryHolder_Keystone_2466_1xAAA | BT1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 2 | LED | LED_0805_2012Metric | D1, D2 |
| 1 | 4.7μH | L_1210_3225Metric | L1 |
| 2 | 0.1μF | C_01005_0402Metric | C1, C2 |
| 1 | 2.2nF | C_01005_0402Metric | C3 |
| 1 | 4.7μF | C_01005_0402Metric | C4 |
| 1 | 10μF | C_01005_0402Metric | C5 |
| 1 | 953kR | R_01005_0402Metric | R1 |
| 1 | 549kR | R_01005_0402Metric | R2 |
| 5 | 10kR | R_01005_0402Metric | R3, R4, R5, R6, R7 |
| 2 | 4.7kR | R_01005_0402Metric | R8, R9 |
| 2 | 330R | R_01005_0402Metric | R10, R11 |
ESP8266-IMU-Node design files
The KiCad project lives in the yunus-kunduz/ESP8266-IMU-Node repository on GitHub; these links point at the commit this page was built from.
ESP8266-IMU-Node: common questions
What microcontroller does the ESP8266-IMU-Node use?
The ESP8266-IMU-Node is built around the ESP-12F, from the ESP8266 family.
How big is the ESP8266-IMU-Node PCB?
The ESP8266-IMU-Node measures 60 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP8266-IMU-Node?
24 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP8266-IMU-Node design files?
From the yunus-kunduz/ESP8266-IMU-Node repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP8266-IMU-Node design in my own project?
Yes, under the terms of its MIT license, which yunus-kunduz chose for the repository.
Can I test firmware for the ESP8266-IMU-Node without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398