Base

yuvve·e7020e_project·hardware/base/base.kicad_pcb

Base PCB layout, top view — open source Nordic nRF board by yuvve

About the Base PCB

Base is an open source Nordic nRF PCB design by yuvve, published on GitHub. It is a 4-layer board measuring 60 × 60 mm, with 71 components from 41 distinct parts.

Its main chip is the nRF52833-QDxx, from the Nordic nRF family. Other key parts include the MAX98357A and MCP1700x-330xxMB. By type, the board carries 23 capacitors, 13 resistors, 6 test points, 5 connectors, 4 diodes and 3 ICs.

Main components on the Base

Base bill of materials (BOM)

71 components, 41 distinct parts.

QtyPartRefs
1
nRF52833-QDxx
U1
1
MAX98357A
U3
1
MCP1700x-330xxMB
U4
1
Fan_ALT
M1
3
Q_NMOS_GSD
Q1, Q2, Q3
1
32kHz
Y1
1
32MHz
Y2
1
1.70 MHz
Y3
1
Debug
J1
1
USB_B_Mini
J2
1
Serial Interface
J3
1
SWD
J4
1
OLED Display
J5
1
HD-EMC1203-LW20-R
B1
1
Battery_Cell
BT1
4
TestPoint
GND1, GND2, GND3, GND4
1
Speaker
LS1
1
~
SW1
1
RotaryEncoder_Switch
SW3
1
Thermistor_NTC
TH1
Show 21 more
QtyPartRefs
6
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6
1
LED
D1
3
D_Schottky_1_3
D2, D3, D4
3
1uF
C1, C6, C16
3
100nf
C2, C8, C13
4
12pF
C3, C4, C12, C14
1
100pF
C5
1
820pF
C7
3
4.7uF
C9, C10, C11
3
10nF
C15, C17, C18
1
0.1uF
C19
1
10uF
C20
1
0.1 uF
C23
2
1.0 uF
C24, C25
6
10k
R1, R2, R5, R6, R12, R13
2
22
R3, R4
1
22 Ohm
R7
1
68 kOhm
R8
1
100 kOhm
R9
1
150 kOhm
R10
1
470 kOhm
R11

Base design files

The KiCad project lives in the yuvve/e7020e_project repository on GitHub; these links point at the commit this page was built from.

Base: common questions

What microcontroller does the Base use?

The Base is built around the nRF52833-QDxx, from the Nordic nRF family.

How big is the Base PCB?

The Base measures 60 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Base?

71 components, from 41 distinct parts. The full bill of materials is listed on this page.

Where can I download the Base design files?

From the yuvve/e7020e_project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Base design in my own project?

The repository has no license, so all rights stay with yuvve. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Base without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards