16 open source boards using the NRF52833_QDXX

Real designs built with the NRF52833_QDXX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the NRF52833_QDXX

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the NRF52833_QDXX connects to, and the resistors, capacitors and other passives placed on it.

  • The DEC1 pin has a capacitor to GND on 12 of 12 designs, most often 100 nF.
  • The VDD pins have a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 1 µF).
  • The VDDH pin has a decoupling capacitor on 12 of 12 designs, most often 4.7 µF (then 100 nF).
  • The DEC6 pin has a capacitor to GND on 12 of 12 designs, most often 1 µF (then 100 nF).
DEC1pin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (12)
XL1/P0.00pin 2Connected to: Signal 50% · not connected 42%
  • Crystal on 33% · 32.768 kHz (3), 32 kHz (1)
  • Capacitor to GND on 33% · 12 pF (4)
XL2/P0.01pin 3Connected to: Signal 50% · not connected 42%
  • Crystal on 33% · 32.768 kHz (3), 32 kHz (1)
  • Capacitor to GND on 33% · 12 pF (4)
AIN3/P0.05pin 5Connected to: Not connected 67% · a signal 33%
P0.11pin 7Connected to: Not connected 67% · a signal 33%
VDDpin 8, 18, 30, 40Connected to: VDD 50% · a signal 50%
  • Decoupling capacitor on 100% · 100 nF (77), 1 µF (49), 4.7 µF (41)
VDDHpin 9Connected to: VBUS 92%
  • Decoupling capacitor on 100% · 4.7 µF (13), 100 nF (5), 1 µF (3)
VBUSpin 10Connected to: VBUS 58% · GND 17% · a signal 25%
  • Decoupling capacitor on 83% · 4.7 µF (13), 1 µF (1)
DECUSBpin 11Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 83% · 4.7 µF (10)
DEC5pin 21Connected to: Not connected 58% · a signal 42%
  • Capacitor to GND on 42% · 820 pF (4), 100 nF (1)
NFC2/P0.10pin 23Connected to: Not connected 67% · a signal 33%
ANTpin 24Connected to: Not connected 50% · a signal 50%
  • Capacitor to GND on 50% · 1 pF (6)
  • Inductor on 50% · 4.7 nH (6)
VSS_PApin 25Connected to: GND 100%
DEC6pin 26Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (11), 100 nF (2), 47 nF (1)
DEC3pin 27Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 pF (12)
XC1pin 28Connected to: Signal 100%
  • Capacitor to GND on 100% · 12 pF (10), 16 pF (1), 10 pF (1)
  • Crystal on 100% · 32 MHz (10)
XC2pin 29Connected to: Signal 100%
  • Crystal on 100% · 32 MHz (10)
  • Capacitor to GND on 100% · 12 pF (10), 16 pF (1), 10 pF (1)
AIN5/P0.29pin 34Connected to: TXB0106RGY 25%
  • Series resistor on 33% · 100 kΩ (3), 100 Ω (1)
VSSpin 37, 41Connected to: GND 96%
DEC4pin 38Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (11), 100 nF (2), 47 nF (1)
DCCpin 39Connected to: Not connected 83% · a signal 17%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Locus by Nieko27, RoyalBlue54L-Feather by LordsBoards, Mito pcb by KOEGlike and Crkbd shockburst by korken89.

The NRF52833_QDXX in open source designs

The gallery holds 16 open source boards using the NRF52833_QDXX from 12 GitHub repositories; a typical one measures about 56.7 × 34 mm and carries around 48 components.

69% use four copper layers or more, and 63% carry an open source license.

The most starred is Locus by Nieko27.

Microcontrollers on boards using the NRF52833_QDXX

NRF52833_QDXX: common questions

Where can I find a NRF52833_QDXX reference design?

Each of the 16 boards on this page is a real design using the NRF52833_QDXX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NRF52833_QDXX DEC1 pin connected?

The DEC1 pin has a capacitor to GND on 12 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the NRF52833_QDXX.

What decoupling capacitors do designs use on the NRF52833_QDXX VDD pin?

The VDD pins have a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the NRF52833_QDXX.

What decoupling capacitors do designs use on the NRF52833_QDXX VDDH pin?

The VDDH pin has a decoupling capacitor on 12 of 12 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 12 open source designs using the NRF52833_QDXX.

What parts are used alongside the NRF52833_QDXX?

The BM15x, nPM1300-QEXX, TPD3E001DRLR, TXB0106RGY and W25Q16JVUXIQ appear in the most repositories here.

Which microcontrollers do boards using the NRF52833_QDXX use?

Most are built on Nordic nRF (15) and ESP32 (1).

How big is a typical board using the NRF52833_QDXX?

The median is 56.7 × 34 mm, and 31% are two-layer designs.

What is the most popular open source board using the NRF52833_QDXX?

By GitHub stars, Locus by Nieko27, with 60 stars.

Can I simulate one of these boards using the NRF52833_QDXX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part