8 open source boards using the MCP1700x-330xxMB
Real designs built with the MCP1700x-330xxMB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
TPP
juan-LARRAYA
96 × 90 mm211 parts2LNo license0Nordic nRF
Base
yuvve
60 × 60 mm71 parts4LNo license0ESP32
ESP32 E-Paper-4.2 V1
filada
91 × 77 mm68 parts2LNo license0Nordic nRF
Wearable v2 nrf
ray4477
40.3 × 40 mm60 parts4LMIT0RP2040/RP2350
MHIPS
mrk-fox
46 × 46 mm46 parts4LCERN-OHL-S-2.00ESP32
Voyager-Panel
Cocotrilito
71 × 50.3 mm44 parts2LMIT0ESP32
GasBee
Sharki-66
55.5 × 35 mm32 parts2LMIT0ESP32
GasBee-Freerouter
Sharki-66
55.5 × 35 mm32 parts2LMIT0
How designs wire the MCP1700x-330xxMB
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP1700x-330xxMB connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 100 nF).
- The VO pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 86% | — |
| VIpin 2 | Connected to: BATT 86% |
|
| VOpin 3 | Connected to: 3.3V 71% · a signal 29% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Voyager-Panel by Cocotrilito, ESP32 E-Paper-4.2 V1 by filada, TPP by juan-LARRAYA and MHIPS by mrk-fox.
The MCP1700x-330xxMB in open source designs
The gallery holds 8 open source boards using the MCP1700x-330xxMB from 7 GitHub repositories; a typical one measures about 57.8 × 48.1 mm and carries around 53 components.
63% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is TPP by juan-LARRAYA.
Parts used alongside the MCP1700x-330xxMB
Microcontrollers on boards using the MCP1700x-330xxMB
What boards using the MCP1700x-330xxMB are built for
MCP1700x-330xxMB: common questions
Where can I find a MCP1700x-330xxMB reference design?
Each of the 8 boards on this page is a real design using the MCP1700x-330xxMB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700x-330xxMB VI pin?
The VI pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP1700x-330xxMB.
What decoupling capacitors do designs use on the MCP1700x-330xxMB VO pin?
The VO pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP1700x-330xxMB.
Which microcontrollers do boards using the MCP1700x-330xxMB use?
Most are built on ESP32 (4), Nordic nRF (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the MCP1700x-330xxMB?
The median is 57.8 × 48.1 mm, and 63% are two-layer designs.
What is the most popular open source board using the MCP1700x-330xxMB?
By GitHub stars, TPP by juan-LARRAYA, with 0 stars.
Can I simulate one of these boards using the MCP1700x-330xxMB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.