Puck
zachariahsharma·puck
About the Puck PCB
Puck is an open source ESP32 PCB design by zachariahsharma, published on GitHub. It is a 4-layer board measuring 29.7 × 72.5 mm, with 20 components from 17 distinct parts.
Its main chip is the ESP32-C6-MINI-1-N4, from the ESP32 family. Other key parts include the ET6226M, AP2112K-3.3TRG1 and MCP9808T-E/MS. By type, the board carries 7 capacitors, 5 resistors, 4 ICs, 2 switches, 1 connector and 1 LED.
It belongs with the sensors designs in this gallery.
From the project
Vynte room-temperature puck hardware: KiCad schematics, PCB layout, and saved fabrication exports.
KiCad hardware design for the Vynte room-temperature puck, part of a room-by-room HVAC comfort system.
Open Puck.kicadpro in KiCad. The main schematic and PCB are Puck.kicadsch and Puck.kicadpcb. Supporting sheets cover the temperature sensor, seven-segment display, voltage regulator, USB Type-C receptacle, and external programming interface. Custom symbols, footprints, models, and a sensor datasheet are included in Comps/`. Library tables are included at the project root.
Main components on the Puck
Puck bill of materials (BOM)
20 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ET6226M UMW(友台半导体) | SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | ESP32-C6-MINI-1-N4 ESP32-C6-MINI-1 Espressif Systems | ESP32-C6-MINI-1 | U3 |
| 1 | AP2112K-3.3TRG1 Diodes Incorporated | SOT95P285X140-5N | U4 |
| 1 | MCP9808T-E/MS MCP9808T-E_MS Microchip Technology | SOP65P490X110-8N | U5 |
| 1 | TYPE-C-31-M-12 Korean Hroparts Elec | HRO_TYPE-C-31-M-12 | J3 |
| 2 | B3F-4055 SW_Push Omron Electronics | SW_PUSH_6mm_H7.3mm | SW1, SW2 |
| 1 | SN760561W/16 ARKLED(方舟) | LED-SEG-TH_10P-L25.0-W19.0-P2.54-S15.2-BL | LED1 |
| 1 | CL10A105KB8NNNC 1 uF Samsung Electro-Mechanics | C_0603 | C1 |
| 1 | CL10B104KB8NNNC 100nF Samsung Electro-Mechanics | C_0603 | C2 |
| 1 | CL10A475KO8NNNC 4.7uF Samsung Electro-Mechanics | C_0603 | C3 |
| 1 | CL10A106KP8NNNC 10uF Samsung Electro-Mechanics | C_0603 | C4 |
| 1 | CL10A105KB8NNNC 1uF Samsung Electro-Mechanics | C_0603 | C5 |
| 1 | CL21B104KCFNNNE 100nF Samsung Electro-Mechanics | C_0805 | C6 |
| 1 | CL10B104KB8NNNC .1uF Samsung Electro-Mechanics | C_0603 | C7 |
| 2 | 0402WGF4701TCE 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R3, R4 |
| 2 | 0603WAF5101T5E 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R5, R6 |
| 1 | 0603WAF1002T5E 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R7 |
Puck design files
The KiCad project lives in the zachariahsharma/puck repository on GitHub; these links point at the commit this page was built from.
- LayoutPuck.kicad_pcb
- SchematicPuck.kicad_sch
- BOMproduction/Puck_0.5.0_bom.csv
Puck: common questions
What microcontroller does the Puck use?
The Puck is built around the ESP32-C6-MINI-1-N4, from the ESP32 family.
How big is the Puck PCB?
The Puck measures 29.7 × 72.5 mm, has 4 copper layers and is 1.61668 mm thick.
How many components are on the Puck?
20 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Puck design files?
From the zachariahsharma/puck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Puck design in my own project?
The repository has no license, so all rights stay with zachariahsharma. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Puck without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k