34 open source boards using the ESP32-C6-MINI-1-N4
Real designs built with the ESP32-C6-MINI-1-N4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Yatchy
Szybet
33.8 × 38 mm89 parts4LNo license180ESP32
Dimmer esp v1 main
dagroe
44 × 48.1 mm53 parts4LMIT21ESP32
Lowpower epaper thermometer
antoinecellerier
48 × 35 mm75 parts2LGPL-3.08ESP32
ESP32-C6-DevKit-Lipo
OLIMEX
25.4 × 44.5 mm71 parts2LNo license5ESP32
Open race v2
teehee567
90.5 × 49.5 mm329 parts8LNo license4ESP32
LIONv3-R
RodrigoCAndrade
50.2 × 85.2 mm79 parts4LNo license4ESP32
LIONv3-Mini
RodrigoCAndrade
50.2 × 40.2 mm78 parts4LNo license2ESP32
Unni smartification c6
lk-ek
46 × 32 mm71 parts4LGPL-3.02ESP32
AiPocket-Kicad-ESP32-P4-seconde
zycero
55 × 55 mm152 parts4LNo license1ESP32
KiCAD converted
sai-ydev
47 × 47 mm62 parts4LMIT1ESP32
ENV Sensor - Variant A (Compact)
marcelpetrick
30 × 34 mm43 parts4LGPL-3.01ESP32
AiPocket-Kicad-ESP32-P4
torykit
55 × 55 mm152 parts4LNo license0ESP32
SGW01
ymhtwe
69 × 69 mm127 parts2LNo license0ESP32
Atx-24pin rev3-candidate
nathanfraske
86 × 95 mm126 parts6LApache-2.00ESP32
Daily mirror
drewhirschi
100 × 100 mm74 parts4LNo license0ESP32
ESP32-C6-IoT
rappepi
20 × 41.5 mm73 parts4LCC-BY-NC-4.00ESP32
Esp32c6-ble sensor coin cell
xmyoot
31.4 × 31 mm53 parts4LNo license0ESP32
Puck
zachariahsharma
29.7 × 72.5 mm20 parts4LNo license0- schematic only · 86 partsESP32
Reckoner
blind-reckoning
86 partsCERN-OHL-S-2.00 ESP32
Unni smartification c6-10.99-constraints
lk-ek
19 × 18 mm66 parts2LGPL-3.02ESP32
ENV Sensor - Variant B (Thermally isolated)
marcelpetrick
28 × 51 mm43 parts4LGPL-3.01ESP32
ESP32-C6
uutzinger
17.8 × 30.3 mm43 parts2LNo license0ESP32
PowerSupply
Dennis960
37.6 × 37.6 mm19 parts2LNo license0ESP32
Eps-8pin rev3
nathanfraske
96 × 40 mm63 parts4LApache-2.00ESP32
Pcie3-rev2
nathanfraske
103.4 × 44 mm54 parts4LApache-2.00ESP32
Baby Monitor Monitor: Sensor
donaldbell
52 × 24 mm28 parts2LCustom license0ESP32
Pcie3-rev2-routed
nathanfraske
103.4 × 44 mm54 parts4LApache-2.00ESP32
Baby Monitor Monitor: Receiver
donaldbell
30 × 30 mm24 parts2LCustom license0ESP32
CEC PCIe 8-pin 3-Port Module
nathanfraske
103.4 × 56 mm54 parts4LApache-2.00ESP32
Build final
nathanfraske
96.1 × 43.7 mm45 parts4LApache-2.00ESP32
Eps rev3-n2
nathanfraske
96.1 × 43.7 mm45 parts4LApache-2.00ESP32
Pcie2-inrow
nathanfraske
86.4 × 44 mm45 parts4LApache-2.00ESP32
Pcie2-inrow routed
nathanfraske
86.4 × 44 mm45 parts4LApache-2.00ESP32
CEC PCIe 8-pin 2-Port Module
nathanfraske
86.4 × 44 mm45 parts4LApache-2.00
How designs wire the ESP32-C6-MINI-1-N4
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the ESP32-C6-MINI-1-N4 connects to, and the resistors, capacitors and other passives placed on it.
- The EN_8 pin has a capacitor to GND on 18 of 20 designs, most often 1 µF (then 100 nF).
- The EN_8 pin has a pull-up to 3.3V on 18 of 20 designs, most often 10 kΩ.
- The NC_4 pin is left unconnected on 20 of 20 designs.
- The NC_7 pin is left unconnected on 20 of 20 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 95% | — |
| GND_2pin 2 | Connected to: GND 95% | — |
| 3V3_3pin 3 | Connected to: 3.3V 90% | — |
| NC_4pin 4 | Connected to: Not connected 100% | — |
| NC_7pin 7 | Connected to: Not connected 100% | — |
| EN_8pin 8 | Connected to: A connector 45% |
|
| GND_11pin 11 | Connected to: GND 95% | — |
| GND_14pin 14 | Connected to: GND 95% | — |
| IO6_15pin 15 | Connected to: Signal 75% · not connected 25% |
|
| IO7_16pin 16 | Connected to: A connector 20% · not connected 30% |
|
| IO12_17pin 17 | Connected to: A connector 25% · not connected 20% |
|
| IO13_18pin 18 | Connected to: A connector 25% · not connected 20% |
|
| NC_21pin 21 | Connected to: Not connected 100% | — |
| IO8_22pin 22 | Connected to: Signal 80% · not connected 20% |
|
| IO9_23pin 23 | Connected to: A connector 25% |
|
| IO22_28pin 28 | Connected to: A connector 20% · not connected 25% |
|
| NC_32pin 32 | Connected to: Not connected 100% | — |
| NC_33pin 33 | Connected to: Not connected 100% | — |
| NC_34pin 34 | Connected to: Not connected 100% | — |
| NC_35pin 35 | Connected to: Not connected 100% | — |
| GND_36pin 36 | Connected to: GND 95% | — |
| GND_37pin 37 | Connected to: GND 95% | — |
| GND_38pin 38 | Connected to: GND 95% | — |
| GND_39pin 39 | Connected to: GND 95% | — |
| GND_40pin 40 | Connected to: GND 95% | — |
| GND_41pin 41 | Connected to: GND 95% | — |
| GND_42pin 42 | Connected to: GND 95% | — |
| GND_43pin 43 | Connected to: GND 95% | — |
| GND_44pin 44 | Connected to: GND 95% | — |
| GND_45pin 45 | Connected to: GND 95% | — |
| GND_46pin 46 | Connected to: GND 95% | — |
| GND_47pin 47 | Connected to: GND 95% | — |
| GND_48pin 48 | Connected to: GND 95% | — |
| GND_49pin 49 | Connected to: GND 94% | — |
| GND_50pin 50 | Connected to: GND 95% | — |
| GND_51pin 51 | Connected to: GND 95% | — |
| GND_52pin 52 | Connected to: GND 95% | — |
| GND_53pin 53 | Connected to: GND 95% | — |
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Yatchy by Szybet, Dimmer esp v1 main by dagroe, Lowpower epaper thermometer by antoinecellerier and ESP32-C6-DevKit-Lipo by OLIMEX.
The ESP32-C6-MINI-1-N4 in open source designs
The gallery holds 34 open source boards using the ESP32-C6-MINI-1-N4 from 22 GitHub repositories; a typical one measures about 50.2 × 44 mm and carries around 58 components.
76% use four copper layers or more, and 53% carry an open source license.
The most starred is Yatchy by Szybet.
Parts used alongside the ESP32-C6-MINI-1-N4
Microcontrollers on boards using the ESP32-C6-MINI-1-N4
What boards using the ESP32-C6-MINI-1-N4 are built for
ESP32-C6-MINI-1-N4: common questions
Where can I find a ESP32-C6-MINI-1-N4 reference design?
Each of the 34 boards on this page is a real design using the ESP32-C6-MINI-1-N4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C6-MINI-1-N4 EN_8 pin connected?
The EN_8 pin has a capacitor to GND on 18 of 20 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 20 open source designs using the ESP32-C6-MINI-1-N4.
How is the ESP32-C6-MINI-1-N4 NC_4 pin connected?
The NC_4 pin is left unconnected on 20 of 20 designs. Counted from the KiCad layouts of 20 open source designs using the ESP32-C6-MINI-1-N4.
How is the ESP32-C6-MINI-1-N4 NC_7 pin connected?
The NC_7 pin is left unconnected on 20 of 20 designs. Counted from the KiCad layouts of 20 open source designs using the ESP32-C6-MINI-1-N4.
What parts are used alongside the ESP32-C6-MINI-1-N4?
The USBLC6-2SC6, AP2112K-3.3TRG1, MCP73831T-2ACI/OT, E80-900M2213S and ESP32-P4NRW32 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C6-MINI-1-N4 use?
Most are built on ESP32 (34).
How big is a typical board using the ESP32-C6-MINI-1-N4?
The median is 50.2 × 44 mm, and 24% are two-layer designs.
What is the most popular open source board using the ESP32-C6-MINI-1-N4?
By GitHub stars, Yatchy by Szybet, with 180 stars.
Can I simulate one of these boards using the ESP32-C6-MINI-1-N4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.