Pi-KACHU

zakuakyt·Pi-KACHU

Pi-KACHU PCB layout, top view — open source RP2040/RP2350 board by zakuakyt

About the Pi-KACHU PCB

Pi-KACHU is an open source RP2040/RP2350 PCB design by zakuakyt, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 33 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVZPIQ TR and MCP1700x-330xxTT. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

My custom rp2040 devboard

Pi-KACHU, from the project README
From the project README

Main components on the Pi-KACHU

Pi-KACHU bill of materials (BOM)

33 components, 16 distinct parts.

QtyPartRefs
1
RP2040
U1
1
W25Q16JVZPIQ TR
U3
1
MCP1700x-330xxTT
U4
1
12 MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x20
J2, J3
1
Conn_01x03
J4
1
SW_Push
SW1
2
1uF
C1, C10
11
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +3
2
10uF
C13, C14
2
33pF
C15, C16
2
5.1k
R1, R2
2
27
R3, R4
2
1K
R5, R6
1
10K
R7

Pi-KACHU design files

The KiCad project lives in the zakuakyt/Pi-KACHU repository on GitHub; these links point at the commit this page was built from.

Pi-KACHU: common questions

What microcontroller does the Pi-KACHU use?

The Pi-KACHU is built around the RP2040, from the RP2040/RP2350 family.

How big is the Pi-KACHU PCB?

The Pi-KACHU measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pi-KACHU?

33 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pi-KACHU design files?

From the zakuakyt/Pi-KACHU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pi-KACHU design in my own project?

The repository has no license, so all rights stay with zakuakyt. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pi-KACHU without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards