MIC19
ZeniteSolar·MIC19·hardware/MIC19.kicad_pcb
About the MIC19 PCB
MIC19 is an open source AVR/Arduino PCB design by ZeniteSolar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 149 × 69.8 mm, with 87 components from 36 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the MCP2551-I/SN, MCP2515-xSO and LM7805. By type, the board carries 32 resistors, 26 capacitors, 14 connectors, 5 diodes, 4 ICs and 2 crystals.
It belongs with the power & battery designs in this gallery.
From the project
Módulo de Interface do Controle da embarcação solar Guarapuvu II (Zênite Solar)
Main components on the MIC19
MIC19 bill of materials (BOM)
87 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2551-I/SN | SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U202 |
| 1 | ATMEGA328P-PU | DIP-28_W7.62mm_Socket | U401 |
| 1 | LM7805 | TO-220-3_Horizontal_TabDown_SMD | U501 |
| 1 | BCV27 | SOT-23_Handsoldering | Q101 |
| 2 | 16MHz | Crystal_HC49-U_Vertical | Y201, Y401 |
| 1 | SW_BOAT_ON | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J101 |
| 1 | ENGINE_VEL | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J102 |
| 1 | SW_PUMP1_ON | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J103 |
| 1 | SW_ENGINE_ON | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J104 |
| 1 | ENGINE_ACEL | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J105 |
| 1 | SW_PUMP2_ON | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J106 |
| 1 | SW_MPPT_ON | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J107 |
| 1 | MPPT_POT | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J108 |
| 1 | SW_PUMP3_ON | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | J109 |
| 1 | SW_DMS | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J110 |
| 1 | SW_EMERGENCIA | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J111 |
| 1 | USART | PinHeader_1x04_P2.54mm_Vertical | J401 |
| 2 | RJ45 | RJ45_YH59_01 | J601, J602 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 500mA | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501 |
| 1 | 1K | Potentiometer_Bourns_3296W_Vertical | RV401 |
| 1 | pesd1can | SOT-23_Handsoldering | D201 |
| 2 | LL4148 | D_MiniMELF_Handsoldering | D401, D501 |
| 1 | BYD77 | D_MiniMELF_Handsoldering | D402 |
| 1 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D403 |
| 11 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C101, C102, C103, C104, C105, C106, C107, C108 +3 |
| 8 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C201, C202, C205, C401, C402, C407, C502, C503 |
| 4 | 22pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C204, C403, C404 |
| 1 | 10nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C406 |
| 2 | 1uF | CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C504 |
| 13 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R101, R102, R103, R107, R108, R109, R113, R114 +5 |
| 16 | 100R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R104, R105, R106, R110, R111, R112, R116, R117 +8 |
| 1 | 120 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202 |
| 1 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R406 |
MIC19 design files
The KiCad project lives in the ZeniteSolar/MIC19 repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/MIC19.kicad_pcb
MIC19: common questions
What microcontroller does the MIC19 use?
The MIC19 is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the MIC19 PCB?
The MIC19 measures 149 × 69.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MIC19?
87 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the MIC19 design files?
From the ZeniteSolar/MIC19 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MIC19 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ZeniteSolar chose for the repository.
Can I test firmware for the MIC19 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k