Basicsensormodule
About the Basicsensormodule PCB
Basicsensormodule is an open source AVR/Arduino PCB design by ZeniteSolar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 121.3 × 52.1 mm, with 50 components from 24 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the MCP2551-I/SN, MCP2515-xSO, A1101ELHL and LM7805. By type, the board carries 18 capacitors, 12 resistors, 6 diodes, 5 ICs, 4 connectors and 2 crystals.
It belongs with the power & battery designs in this gallery.
From the project
Tachometer Module for CANBUS with ATmega328p
Main components on the Basicsensormodule
Basicsensormodule bill of materials (BOM)
50 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2551-I/SN | SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U202 |
| 1 | A1101ELHL | SOT-23 | U301 |
| 1 | ATMEGA328P-PU | DIP-28_W7.62mm_Socket | U401 |
| 1 | LM7805 | TO-220-3_Horizontal_TabDown_SMD | U501 |
| 2 | 16MHz | Crystal_HC49-U_Vertical | Y201, Y401 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USART | PinHeader_1x04_P2.54mm_Vertical | J401 |
| 2 | RJ45 | RJ45_YH59_01 | J601, J602 |
| 1 | 500mA | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501 |
| 2 | 4.7V | D_MiniMELF_Handsoldering | Z101, Z102 |
| 3 | LL4148 | D_MiniMELF_Handsoldering | D101, D401, D501 |
| 1 | pesd1can | SOT-23_Handsoldering | D201 |
| 2 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D402, D403 |
| 1 | 4.7n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C101 |
| 10 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C102, C201, C202, C205, C401, C402, C405, C406 +2 |
| 4 | 22pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C204, C403, C404 |
| 2 | 1uF | CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C504 |
| 3 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R101, R103, R601 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R102, R203, R401 |
| 1 | 120 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202 |
| 4 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R403, R404, R405 |
Basicsensormodule design files
The KiCad project lives in the ZeniteSolar/MT19 repository on GitHub; these links point at the commit this page was built from.
Basicsensormodule: common questions
What microcontroller does the Basicsensormodule use?
The Basicsensormodule is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the Basicsensormodule PCB?
The Basicsensormodule measures 121.3 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Basicsensormodule?
50 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Basicsensormodule design files?
From the ZeniteSolar/MT19 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Basicsensormodule design in my own project?
Yes, under the terms of its GPL-3.0 license, which ZeniteSolar chose for the repository.
Can I test firmware for the Basicsensormodule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in MT19
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746