Heating controller
Zepheus·opentherm_heating_controller
About the Heating controller PCB
Heating controller is an open source ESP32 PCB design by Zepheus, published on GitHub under the MIT license. It is a 2-layer board measuring 160 × 95 mm, with 92 components from 53 distinct parts.
Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the LDL1117S33R, USBLC6-2SC6 and C109227. By type, the board carries 32 resistors, 14 diodes, 11 connectors, 10 capacitors, 6 LEDs and 5 ICs.
It belongs with the iot & wireless designs in this gallery.
From the project
An open-source OpenTherm heating controller PCB
ESP32-C6 heating controller for a UK wiring centre, built for Home Assistant and ESPHome. Board revision v1.0
Andiron is an isolated I/O board for a domestic heating system. It sits in the wiring centre, switches the zone valves and boiler demand through four volt-free changeover relays, and talks to the boiler over OpenTherm. All the logic (schedules, thermostats, weather compensation) lives in Home Assistant. The board was designed around an ESPHome firmware, which will be written and published once the first boards are in hand.

Main components on the Heating controller
Heating controller bill of materials (BOM)
92 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-WROOM-1-N8 | WIRELM-SMD_ESP32-C6-WROOM-1 | U1 |
| 1 | LDL1117S33R | SOT-223-3_TabPin2 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | C109227 LTV-817S (TX) | OPTO-SMD-4_L4.6-W6.5-P2.54-LS10.3-BL | U201 |
| 1 | C109227 LTV-817S (RX) | OPTO-SMD-4_L4.6-W6.5-P2.54-LS10.3-BL | U202 |
| 4 | AO3400A | SOT-23 | Q101, Q102, Q103, Q104 |
| 1 | S8550 | SOT-23 | Q201 |
| 1 | C165948 USB-C 16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C474893 FLOW | CONN-TH_3P-P3.50_KF350-3.5-3P | J3 |
| 1 | C474893 OUTDOOR | CONN-TH_3P-P3.50_KF350-3.5-3P | J4 |
| 1 | C160404 OLED (Qwiic) GND/3V3/SDA/SCL | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | C160404 QWIIC | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6 |
| 1 | C492407 SPARE GPIO | PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | C8270 CH1 NC/COM/NO | CONN-TH_3P-P5.00_WJ128V-5.0-3P | J111 |
| 1 | C8270 CH2 NC/COM/NO | CONN-TH_3P-P5.00_WJ128V-5.0-3P | J112 |
| 1 | C8270 CH3 NC/COM/NO | CONN-TH_3P-P5.00_WJ128V-5.0-3P | J113 |
| 1 | C8270 CH4 NC/COM/NO | CONN-TH_3P-P5.00_WJ128V-5.0-3P | J114 |
| 1 | C474892 OT (24V max) | CONN-TH_P3.50_KF350-3.5-2P | J201 |
| 1 | C83798 1A 250V fast | Fuse_Littelfuse-NANO2-451_453 | F201 |
| 4 | RT314005 | RELAY-TH_RT314005_HF115F-PINS | K101, K102, K103, K104 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C318884 RESET | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1 |
| 1 | C318884 BOOT | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW2 |
| 1 | C318884 BTN1 | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW3 |
| 1 | C318884 BTN2 | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW4 |
| 1 | C2286 STATUS | LED_0603_1608Metric | LED1 |
| 1 | C2286 OT_ACT | LED_0603_1608Metric | LED2 |
| 1 | C2286 K1 | LED_0603_1608Metric | LED101 |
| 1 | C2286 K2 | LED_0603_1608Metric | LED102 |
| 1 | C2286 K3 | LED_0603_1608Metric | LED103 |
| 1 | C2286 K4 | LED_0603_1608Metric | LED104 |
| 2 | SMF5.0A | D_SOD-123F | D1, D2 |
| 8 | 1N4148WS | D_SOD-323 | D101, D102, D103, D104, D201, D202, D203, D204 |
| 1 | C19077400 4V7 BZT52C4V7 | D_SOD-123 | D205 |
| 1 | C19077412 15V BZT52C15 | D_SOD-123 | D206 |
| 1 | C19077399 4V3 BZT52C4V3 | D_SOD-123 | D207 |
| 1 | SMAJ24A | D_SMA | D208 |
| 1 | 1NF 1nF | C_0603_1608Metric | C1 |
| 1 | 470UF/16V 470uF/16V | CP_Elec_8x10 | C2 |
| 2 | 10UF 10uF | C_0805_2012Metric | C3, C4 |
| 4 | 100NF 100nF | C_0603_1608Metric | C5, C7, C9, C10 |
| 1 | 22UF 22uF | C_0805_2012Metric | C6 |
| 1 | 1UF 1uF | C_0603_1608Metric | C8 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 1M | R_0603_1608Metric | R3 |
| 6 | 10K 10k | R_0603_1608Metric | R4, R5, R6, R7, R9, R11 |
| 6 | 1k | R_0603_1608Metric | R8, R10, R113, R123, R133, R143 |
| 3 | 4.7K 4.7k | R_0603_1608Metric | R12, R13, R14 |
| 2 | 330 | R_0603_1608Metric | R15, R204 |
| 5 | 100 | R_0603_1608Metric | R111, R121, R131, R141, R203 |
| 4 | 100K 100k | R_0603_1608Metric | R112, R122, R132, R142 |
| 1 | 330 | R_1206_3216Metric | R201 |
| 1 | 220 | R_0603_1608Metric | R202 |
| 1 | 1.5K 1.5k | R_0603_1608Metric | R205 |
Heating controller design files
The KiCad project lives in the Zepheus/opentherm_heating_controller repository on GitHub; these links point at the commit this page was built from.
Heating controller: common questions
What microcontroller does the Heating controller use?
The Heating controller is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.
How big is the Heating controller PCB?
The Heating controller measures 160 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Heating controller?
92 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Heating controller design files?
From the Zepheus/opentherm_heating_controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Heating controller design in my own project?
Yes, under the terms of its MIT license, which Zepheus chose for the repository.
Can I test firmware for the Heating controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in opentherm_heating_controller
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k