Wasp 0.3
About the Wasp 0.3 PCB
Wasp 0.3 is an open source PCB design by zero-emission, published on GitHub. It is a 2-layer board measuring 65 × 85 mm, with 57 components from 30 distinct parts.
Other key parts include the 4069, LM13700 and AMS1117-5.0. By type, the board carries 27 resistors, 14 capacitors, 7 connectors, 3 ICs and 3 diodes.
It belongs with the audio designs in this gallery.
From the project
Clones and remakes of Eurorack synth modules which I found interesting and useful
Main components on the Wasp 0.3
Wasp 0.3 bill of materials (BOM)
57 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4069 | DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | LM13700 | DIP-16_W7.62mm_Socket_LongPads | U2 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U3 |
| 1 | INPUT_SWT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | RES_POT | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | FLT_MODE_SWT | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | CUT_POT | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | OUT_SWT | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | CV | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Eurorack_16_pin | PinHeader_2x08_P2.54mm_Vertical | J7 |
| 1 | 1M | Potentiometer_Bourns_3296W_Vertical | GAIN1 |
| 2 | 100K | Potentiometer_Bourns_3296W_Vertical | RV9, RV18 |
| 3 | DIODE | D_T-1_P5.08mm_Horizontal | D1, D2, D3 |
| 3 | 220n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C4, C5 |
| 4 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C6, C9, C14 |
| 1 | 68p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 47uF | CP_Radial_D5.0mm_P2.50mm | C7 |
| 4 | 1n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C8, C10, C11, C12 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C13 |
| 7 | 33K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R10, R12, R19, R22, R29 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 33K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R4, R28 |
| 4 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R7, R13, R25 |
| 2 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11, R21 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R14 |
| 3 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R16, R17 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R20 |
| 1 | 51K | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R23 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26, R27 |
Wasp 0.3 design files
The KiCad project lives in the zero-emission/Eurorack_Clones repository on GitHub; these links point at the commit this page was built from.
Wasp 0.3: common questions
How big is the Wasp 0.3 PCB?
The Wasp 0.3 measures 65 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wasp 0.3?
57 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wasp 0.3 design files?
From the zero-emission/Eurorack_Clones repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Wasp 0.3 design in my own project?
The repository has no license, so all rights stay with zero-emission. Use it as a reference, and ask the author before reusing the design.
More boards in Eurorack_Clones
Wasp 0.5
50 × 80.5 mm57 parts2LNo license14
Wasp 0.2
65 × 85 mm56 parts2LNo license14
Yusynth adsr
45 × 100 mm51 parts2LNo license14
FC more vcas
41.4 × 100 mm44 parts2LNo license14
FC power
110 × 40 mm32 parts2LNo license14
Lmnc ar ad
64 × 29 mm23 parts2LNo license14
DSO adapter
71 × 17.5 mm12 parts2LNo license14
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687