DSPAmp
Zighhi·DSPAmp·hardware/DSPAmp.kicad_sch

About the DSPAmp PCB
DSPAmp is an open source PCB design by Zighhi, published on GitHub under the CC-BY-SA-4.0 license. It is a board, with 142 components from 39 distinct parts.
Other key parts include the TL072, LM2596 Module, OPA2134, ADAU1701 DSP Module and TPA3118 Module. By type, the board carries 64 resistors, 44 capacitors, 18 connectors, 12 ICs, 2 transistors and 1 switch.
It belongs with the audio, test & measurement and usb & debug tools designs in this gallery.
From the project
Multichannel audio amplifier with a programmable ADAU1701 DSP: balanced I/O, Class-D outputs, LTspice + REW measurements. MSc thesis, best in programme history.
A multichannel audio amplifier with a real-time programmable DSP: balanced and unbalanced line inputs with switchable gain, an ADAU1701 SigmaDSP, four balanced line outputs and four Class-D power outputs, all running from a single 12 V supply. Designed, simulated, built and measured as my MSc dissertation.
Measured in loopback with an external audio interface and Room EQ Wizard; DSP controlled live from SigmaStudio.
Main components on the DSPAmp
DSPAmp bill of materials (BOM)
142 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | U1 | |
| 1 | LM2596 Module | U2 | |
| 1 | OPA2134 | DIP-8_W7.62mm | U3 |
| 1 | ADAU1701 DSP Module | U4 | |
| 4 | TPA3118 Module | U5, U6, U7, U8 | |
| 4 | OPA2134 | U9, U10, U11, U12 | |
| 2 | 2N7000 | TO-92_Inline | Q1, Q2 |
| 1 | Barrel_Jack | J1 | |
| 6 | NCJ6FI-V | Jack_XLR-6.35mm_Neutrik_NCJ6FI-V_Vertical | J2, J4, J16, J17, J18, J19 |
| 1 | NRJ6HM-1 | Jack_6.35mm_Neutrik_NRJ6HM-1_Horizontal | J3 |
| 1 | SPK1+ | J5 | |
| 1 | SPK1- | J6 | |
| 1 | SPK2+ | J7 | |
| 1 | SPK2- | J8 | |
| 1 | SPK3+ | J9 | |
| 1 | SPK3- | J10 | |
| 1 | SPK4+ | J11 | |
| 1 | SPK4- | J12 | |
| 2 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | J20, J21 | |
| 1 | SW_DPDT_X2 SW_DPDT_x2 | SW1 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | D1 | |
| 3 | 100UF 100uF | C1, C3, C44 | |
| 9 | 10UF 10uF | C2, C5, C6, C9, C13, C14, C15, C22 +1 | |
| 6 | 0.1UF 0.1uF | C4, C21, C29, C34, C39, C40 | |
| 10 | 100PF 100pF | C7, C8, C10, C16, C17, C18, C25, C30 +2 | |
| 4 | 27PF 27pF | C11, C12, C19, C20 | |
| 12 | 47UF 47uF | C24, C26, C27, C28, C31, C32, C33, C36 +4 | |
| 10 | 100K 100k | R1, R2, R3, R4, R9, R17, R20, R21 +2 | |
| 6 | 100 | R5, R6, R10, R18, R22, R23 | |
| 7 | 10K 10k | R7, R8, R24, R25, R62, R63, R64 | |
| 2 | 2k | R11, R19 | |
| 2 | 8.2K 8.2k | R12, R26 | |
| 4 | 6.2K 6.2k | R13, R15, R27, R29 | |
| 2 | 390 | R14, R28 | |
| 2 | 2.2K 2.2k | R16, R30 | |
| 12 | 22K 22k | R33, R36, R38, R40, R43, R44, R47, R50 +4 | |
| 8 | 1k | R34, R35, R41, R42, R48, R49, R55, R56 | |
| 8 | 68 | R37, R39, R45, R46, R52, R53, R59, R60 | |
| 1 | 470 | R61 |
DSPAmp design files
The KiCad project lives in the Zighhi/DSPAmp repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/DSPAmp.kicad_sch
- BOMhardware/BOM.csv
DSPAmp: common questions
How many components are on the DSPAmp?
142 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DSPAmp design files?
From the Zighhi/DSPAmp repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the DSPAmp design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Zighhi chose for the repository.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956