STM32-Hexapod-Controller

ZSP-Electronics·STM32-Hexapod-Controller·STM32 Hexapod Controller/STM32 Hexapod Controller.kicad_pcb

STM32-Hexapod-Controller PCB layout, top view — open source STM32 board by ZSP-Electronics

About the STM32-Hexapod-Controller PCB

STM32-Hexapod-Controller is an open source STM32 PCB design by ZSP-Electronics, published on GitHub. It is a 4-layer board measuring 83.5 × 69 mm, with 103 components from 53 distinct parts.

Its main chip is the STM32F446RETX, from the STM32 family. Other key parts include the 74126, TPS56528DDAR, AZ1117CH-3.3TRG1, ESP32-C3-WROOM-02 and TJA1051T-3. By type, the board carries 32 resistors, 24 capacitors, 21 connectors, 10 diodes, 7 ICs and 3 switches.

Main components on the STM32-Hexapod-Controller

STM32-Hexapod-Controller bill of materials (BOM)

103 components, 53 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74126
U1
1
TPS56528DDAR
U2
1
AZ1117CH-3.3TRG1
AZ1117CH-3_3TRG1
Diodes Incorporated
U3
1
ESP32-C3-WROOM-02
U4
1
STM32F446RETX
STM32F446RETx
U5
1
TJA1051T-3
U6
1
LSM6DSOTR
U7
1
ARDUINO_UNO_R3
Arduino_UNO_R3
A1
1
2N7002AQ
Q1
1
Resonator_Small
Y1
7
CONN_01X03_SOCKET
Conn_01x03_Socket
J1, J2, J3, J4, J5, J6, J18
1
CONN_01X03
Conn_01x03
J7
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J8
6
CONN_01X02_SOCKET
Conn_01x02_Socket
J9, J10, J11, J12, J13, J14
1
CONN_01X02_PIN
Conn_01x02_Pin
J16
1
CONN_01X12_PIN
Conn_01x12_Pin
J17
1
CONN_01X03_SOCKET
Conn_01x03_Socket
J19
1
CONN_01X05_SOCKET
Conn_01x05_Socket
J20
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J21
1
CONN_002
P1
Show 33 more
QtyPartRefs
1
Buzzer
BZ1
1
Polyfuse_Small
F1
2
SW_Push
SW1, SW2
1
SW_Push
SW3
1
1N914WT
D1
1
STM
D2
4
DESD5V0U1BA
D3, D4, D5, D6
2
D_Small
D7, D10
1
ESP
D8
1
LED
D9
1
3.3UH
3.3uH
L1
2
100UF
100uF
C1, C2
1
10U
10u
C3
8
10UF
10uF
C4, C38, C39, C40, C41, C42, C45, C46
3
10UF
10uF
C6, C7, C13
1
.1uF
C8
3
22UF
22uF
C9, C10, C14
1
.47uF
C11
1
1UF
1uF
C12
2
47PF
47pF
C35, C37
1
1NF
1nF
C47
1
4.7UF
4.7uF
C48
7
1K
R1, R2, R4, R21, R25, R26, R33
2
1K5
R3, R10
1
DNP
R5
1
3K
R6
9
10K
R7, R8, R18, R19, R20, R23, R28, R29 +1
1
11K5
R9
1
100K
R11
5
100R
R12, R13, R14, R15, R24
2
5.1K
R16, R17
1
120R
R22
2
4K7
R31, R32

STM32-Hexapod-Controller design files

The KiCad project lives in the ZSP-Electronics/STM32-Hexapod-Controller repository on GitHub; these links point at the commit this page was built from.

STM32-Hexapod-Controller: common questions

What microcontroller does the STM32-Hexapod-Controller use?

The STM32-Hexapod-Controller is built around the STM32F446RETX, from the STM32 family.

How big is the STM32-Hexapod-Controller PCB?

The STM32-Hexapod-Controller measures 83.5 × 69 mm, has 4 copper layers and is 1.66 mm thick.

How many components are on the STM32-Hexapod-Controller?

103 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32-Hexapod-Controller design files?

From the ZSP-Electronics/STM32-Hexapod-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32-Hexapod-Controller design in my own project?

The repository has no license, so all rights stay with ZSP-Electronics. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Hexapod-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards