Temp module
Zwackelmann·brewbot·pcb/temp-module/temp-module.kicad_pcb
About the Temp module
Temp module is an open source AVR/Arduino PCB design by Zwackelmann, published on GitHub. It is a 2-layer board measuring 37 × 27 mm, with 15 components from 9 distinct parts.
Its main chip is the Connector_male_4x8, from the AVR/Arduino family. Other key parts include the MCP6002-xP. By type, the board carries 9 resistors, 3 capacitors, 2 connectors and 1 IC.
Main components on the Temp module
Temp module bill of materials (BOM)
15 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6002-xP | DIP-8_W7.62mm | U1 |
| 1 | Connector_male_4x8 | Connector_male_4x8 | J1 |
| 1 | Screw_Terminal_01x03 | Wago_734-163_1x03_P3.50mm_Horizontal | J2 |
| 1 | 10uF/16V | C_1206_3216Metric | C1 |
| 2 | 100nF | C_1206_3216Metric | C2, C4 |
| 2 | 10k | R_0805_2012Metric | R1, R2_3 |
| 3 | 20.5k | R_0805_2012Metric | R2_1, R2_2, R3 |
| 3 | 3k | R_0805_2012Metric | R4_1, R4_2, R5 |
| 1 | 1k | R_0805_2012Metric | R4_3 |
Temp module design files
The KiCad project lives in the Zwackelmann/brewbot repository on GitHub; these links point at the commit this page was built from.
Temp module: common questions
What microcontroller does the Temp module use?
The Temp module is built around the Connector_male_4x8, from the AVR/Arduino family.
How big is the Temp module?
The Temp module measures 37 × 27 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Temp module?
15 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Temp module design files?
From the Zwackelmann/brewbot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Temp module design in my own project?
The repository has no license, so all rights stay with Zwackelmann. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Temp module without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in brewbot
AVR/Arduino
Can atmega layout-2025-07-01
Zwackelmann
111 × 150 mm39 parts2LNo license0AVR/Arduino
Temp sensor
Zwackelmann
52.5 × 52.5 mm36 parts2LNo license0AVR/Arduino
Can atmega
Zwackelmann
37 × 48 mm26 parts2LNo license0Can atmega-02-layout2
Zwackelmann
114 × 56 mm16 parts2LNo license0Motor module
Zwackelmann
37 × 27 mm7 parts2LNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k