Can atmega layout-2025-07-01

Zwackelmann·brewbot·pcb/can-atmega-layout/can-atmega-layout-2025-07-01.kicad_pcb

Can atmega layout-2025-07-01 PCB layout, top view — open source AVR/Arduino board by Zwackelmann

About the Can atmega layout-2025-07-01 PCB

Can atmega layout-2025-07-01 is an open source AVR/Arduino PCB design by Zwackelmann, published on GitHub. It is a 2-layer board measuring 111 × 150 mm, with 39 components from 23 distinct parts.

Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the MCP6002-xP, TJA1051T and MCP2515-xSO. By type, the board carries 12 capacitors, 12 resistors, 4 ICs, 4 connectors, 2 crystals and 1 transistor.

Main components on the Can atmega layout-2025-07-01

Can atmega layout-2025-07-01 bill of materials (BOM)

39 components, 23 distinct parts.

QtyPartRefs
1
MCP6002-xP
U1
1
TJA1051T
U2
1
MCP2515-xSO
U3
1
ATmega328P-A
U4
1
2N 2222A SMD Bipolartransistor, NPN, 40V, 0,8A, 0,4W, SOT-23
Q1
2
16MHz
X1, X2
1
Screw_Terminal_01x05
J1
1
Screw_Terminal_01x03
J2
1
Conn_02x03_Odd_Even
J3
1
Connector_female_4x8
J4
1
AZ822-2C-5DSE Signal-Relais, 5 V DC, 2 A, 2 CO
K1
1
Green
LED1
1
GS1A Gleichrichterdiode, 50 V, 1 A, DO-214AC/SMA
D1
1
10uH
L1
1
1uF
C1
1
100nF
C2
5
0.1uF
C3, C4, C8, C9, C10
4
22PF
C5, C6, C11, C12
1
10uF/16V
C7
3
10k
R1, R2, R2_3
Show 3 more
QtyPartRefs
3
1k
R1_1, R1_2, R4_3
3
20.5k
R2_1, R2_2, R3
3
3k
R4_1, R4_2, R5

Can atmega layout-2025-07-01 design files

The KiCad project lives in the Zwackelmann/brewbot repository on GitHub; these links point at the commit this page was built from.

Can atmega layout-2025-07-01: common questions

What microcontroller does the Can atmega layout-2025-07-01 use?

The Can atmega layout-2025-07-01 is built around the ATmega328P-A, from the AVR/Arduino family.

How big is the Can atmega layout-2025-07-01 PCB?

The Can atmega layout-2025-07-01 measures 111 × 150 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Can atmega layout-2025-07-01?

39 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Can atmega layout-2025-07-01 design files?

From the Zwackelmann/brewbot repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Can atmega layout-2025-07-01 design in my own project?

The repository has no license, so all rights stay with Zwackelmann. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Can atmega layout-2025-07-01 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in brewbot

Similar boards