Temp sensor
Zwackelmann·brewbot·pcb/temp-sensor/temp-sensor.kicad_pcb
About the Temp sensor PCB
Temp sensor is an open source AVR/Arduino PCB design by Zwackelmann, published on GitHub. It is a 2-layer board measuring 52.5 × 52.5 mm, with 36 components from 19 distinct parts.
Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the LM1117-5.0, TJA1051T, MCP2515-xSO and MCP6002-xSN. By type, the board carries 15 capacitors, 9 resistors, 5 ICs, 4 connectors, 2 crystals and 1 LED.
It belongs with the sensors designs in this gallery.
Main components on the Temp sensor
Temp sensor bill of materials (BOM)
36 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117-5.0 | SOT-223 | U1 |
| 1 | TJA1051T | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U3 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U4 |
| 1 | MCP6002-xSN | DIP-8_W7.62mm | U5 |
| 2 | 16MHz | Crystal_HC49-4H_Vertical | X1, X2 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1, J2, J3 |
| 1 | Conn_01x04_Female | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Green | LED_EL_0603_GR1_1608 | LED1 |
| 2 | 1uF | C_KEM_0805_2.0x1.25mm | C1, C12 |
| 3 | 10uF/16V | C_TAJ_3516_Bauform_A | C2, C8, C15 |
| 6 | 0.1uF | C_KEM_0805_2.0x1.25mm | C3, C4, C7, C9, C13, C14 |
| 4 | 22PF | C_KEM_0805_2.0x1.25mm | C5, C6, C10, C11 |
| 1 | 1K | R_SPR-0603_1.6x0.8mm | R1 |
| 3 | 10K | R_SPR-0603_1.6x0.8mm | R2, R3, R8 |
| 2 | 5.1K | R_SPR-0603_1.6x0.8mm | R4, R6 |
| 1 | 330R | R_SPR-0603_1.6x0.8mm | R5 |
| 1 | 1.3K | R_SPR-0603_1.6x0.8mm | R7 |
| 1 | 110K | R_SPR-0603_1.6x0.8mm | R9 |
Temp sensor design files
The KiCad project lives in the Zwackelmann/brewbot repository on GitHub; these links point at the commit this page was built from.
Temp sensor: common questions
What microcontroller does the Temp sensor use?
The Temp sensor is built around the ATmega328P-A, from the AVR/Arduino family.
How big is the Temp sensor PCB?
The Temp sensor measures 52.5 × 52.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Temp sensor?
36 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Temp sensor design files?
From the Zwackelmann/brewbot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Temp sensor design in my own project?
The repository has no license, so all rights stay with Zwackelmann. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Temp sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in brewbot
AVR/Arduino
Can atmega layout-2025-07-01
Zwackelmann
111 × 150 mm39 parts2LNo license0AVR/Arduino
Can atmega
Zwackelmann
37 × 48 mm26 parts2LNo license0Can atmega-02-layout2
Zwackelmann
114 × 56 mm16 parts2LNo license0AVR/Arduino
Temp module
Zwackelmann
37 × 27 mm15 parts2LNo license0Motor module
Zwackelmann
37 × 27 mm7 parts2LNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k