ZYYY-4k-Macropad-

ZYYY-PRO·ZYYY-4k-Macropad-·PCB_and_SCH/zyypadmarco.kicad_pcb

ZYYY-4k-Macropad- PCB layout, top view — open source RP2040/RP2350 board by ZYYY-PRO

About the ZYYY-4k-Macropad- PCB

ZYYY-4k-Macropad- is an open source RP2040/RP2350 PCB design by ZYYY-PRO, published on GitHub under the MIT license. It is a 2-layer board measuring 114.4 × 92.1 mm, with 79 components from 20 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the USBLC6-2SC6, 3.3V Fixed Regulator and W25Q32JVSS. By type, the board carries 21 switches, 20 diodes, 18 capacitors, 9 resistors, 4 ICs and 2 connectors.

It belongs with the keyboards designs in this gallery.

From the project

All the files that are required to produce the pcb is opensource

Visit here for the Billing of Material: Parts.md

Started deep-dive research into mechanical keyboard mounting styles (Gasket vs. Tray).

Analyzed the RP2040 Datasheet to understand pin mapping.

Studied the Keyboard Matrix logic to plan the 4x5 layout.

Integrated the MCU, USB-C components, and the Rotary Encoder into the circuit.

Finalized the diode-per-switch logic to ensure NKRO (N-Key Rollover).

Main components on the ZYYY-4k-Macropad-

RP2040USBLC6-2SC63.3V Fixed RegulatorW25Q32JVSS

ZYYY-4k-Macropad- bill of materials (BOM)

79 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
USBLC6-2SC6
U2
1
3.3V Fixed Regulator
U4
1
W25Q32JVSS
U5
1
12Mhz 3225
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
JST - 1.00mm 4 Pin
J2
1
700mA
F1
2
button
PS1, PS2
1
RE1
SW1
20
Switch
SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +12
20
Diddy
D2, D3, D4, D5, D6, D7, D8, D9 +12
1
100 Ohm @ 100 MHz
FB1
5
1u
C1, C5, C7, C8, C11
11
100n
C2, C3, C4, C6, C9, C10, C12, C13 +3
2
30pf
C16, C17
2
22
R1, R2
2
1k
R3, R8
2
5.1k
R4, R5
3
10k
R6, R7, R9

ZYYY-4k-Macropad- design files

The KiCad project lives in the ZYYY-PRO/ZYYY-4k-Macropad- repository on GitHub; these links point at the commit this page was built from.

ZYYY-4k-Macropad-: common questions

What microcontroller does the ZYYY-4k-Macropad- use?

The ZYYY-4k-Macropad- is built around the RP2040, from the RP2040/RP2350 family.

How big is the ZYYY-4k-Macropad- PCB?

The ZYYY-4k-Macropad- measures 114.4 × 92.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ZYYY-4k-Macropad-?

79 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ZYYY-4k-Macropad- design files?

From the ZYYY-PRO/ZYYY-4k-Macropad- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ZYYY-4k-Macropad- design in my own project?

Yes, under the terms of its MIT license, which ZYYY-PRO chose for the repository.

Can I test firmware for the ZYYY-4k-Macropad- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards