Smart watch
zzatuchni·smart_watch·hw/kicad/smart_watch/smart_watch.kicad_pcb
About the Smart watch PCB
Smart watch is an open source STM32 PCB design by zzatuchni, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 50 components from 25 distinct parts.
Its main chip is the STM32L476RGTx, from the STM32 family. Other key parts include the nPM1300-QEAA, SHT41, ICM-20948, CH340E and DS3231MZ. By type, the board carries 22 capacitors, 10 resistors, 6 ICs, 4 connectors, 4 switches and 2 inductors.
It belongs with the wearables designs in this gallery.
Main components on the Smart watch
Smart watch bill of materials (BOM)
50 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L476RGTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | nPM1300-QEAA | nPM1300 | U2 |
| 1 | SHT41 | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | ICM-20948 | InvenSense_QFN-24_3x3mm_P0.4mm | U4 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | DS3231MZ | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | 2N7000 ON Semiconductor | SOT-23 | Q1 |
| 1 | BATTERTY | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | 1051330001 Molex | USB_Micro_B_Female_Vert_1051330001 | J2 |
| 1 | GC9A01 LCD | GC9A01_FPC_pads_P0.7mm | J3 |
| 1 | ZH7 | JST_ZH_S7B-ZR-SM4A-TF_1x07-1MP_P1.50mm_Horizontal | J4 |
| 4 | SW_Push | TL6340 | SW1, SW2, SW3, SW4 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT23-6L | D1 |
| 2 | 2.2u | L_0603_1608Metric | L20, L21 |
| 1 | 0.1u | C_0603_1608Metric | C2 |
| 1 | 4.7u | C_0603_1608Metric | C10 |
| 13 | 100n | C_0603_1608Metric | C11, C12, C13, C14, C15, C16, C27, C30 +5 |
| 1 | 1u | C_0603_1608Metric | C20 |
| 5 | 10u | C_0603_1608Metric | C21, C22, C23, C25, C26 |
| 1 | 2.2u | C_0603_1608Metric | C24 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0 | R_0603_1608Metric | R1 |
| 6 | 10k | R_0603_1608Metric | R2, R3, R4, R10, R11, R12 |
| 1 | 2.2k | R_0603_1608Metric | R5 |
| 1 | 47k | R_0603_1608Metric | R20 |
| 1 | 250k | R_0603_1608Metric | R21 |
Smart watch design files
The KiCad project lives in the zzatuchni/smart_watch repository on GitHub; these links point at the commit this page was built from.
Smart watch: common questions
What microcontroller does the Smart watch use?
The Smart watch is built around the STM32L476RGTx, from the STM32 family.
How big is the Smart watch PCB?
The Smart watch measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Smart watch?
50 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart watch design files?
From the zzatuchni/smart_watch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smart watch design in my own project?
The repository has no license, so all rights stay with zzatuchni. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart watch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k