5 open source boards using the nPM1300-QEAA
Real designs built with the nPM1300-QEAA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Sidewalk Devkit
hlord2000
55 × 34 mm137 parts6LCERN-OHL-P-2.01Nordic nRF
LM20MeshNode
cvaldess
40 × 85.7 mm75 parts4LCERN-OHL-S-2.01Nordic nRF
BLE Gauge
N4TH4NB
65 × 65 mm55 parts4LNo license0STM32
Smart watch
zzatuchni
40 × 40 mm50 parts4LNo license0Nordic nRF
Board 1
Triksha-health
54.7 × 50 mm38 parts4LNo license0
How designs wire the nPM1300-QEAA
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the nPM1300-QEAA connects to, and the resistors, capacitors and other passives placed on it.
- The SW2_5 pin has a inductor on 5 of 5 designs, most often 2.2 µH.
- The VSET2_16 pin has a resistor to GND on 5 of 5 designs, most often 250 kΩ (then 330 kΩ).
- The VBAT_19 pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF (then 1 µF).
- The VBUS_21 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUT1_1pin 1 | Connected to: 1.8V 40% · not connected 20% · a signal 40% |
|
| PVSS1_2pin 2 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| SW1_3pin 3 | Connected to: Signal 80% · not connected 20% |
|
| PVDD_4pin 4 | Connected to: VSYS 100% |
|
| SW2_5pin 5 | Connected to: Signal 100% |
|
| PVSS2_6pin 6 | Connected to: GND 80% · a signal 20% | — |
| GPIO1_8pin 8 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO2_9pin 9 | Connected to: Not connected 100% | — |
| GPIO3_10pin 10 | Connected to: Not connected 100% | — |
| GPIO4_11pin 11 | Connected to: Not connected 100% | — |
| VDDIO_12pin 12 | Connected to: 3.3V 100% |
|
| SDA_13pin 13 | Connected to: The microcontroller 60%, a connector 40% |
|
| SCL_14pin 14 | Connected to: The microcontroller 60%, a connector 40% |
|
| VSET2_16pin 16 | Connected to: Signal 100% |
|
| VSET1_17pin 17 | Connected to: Signal 80% · not connected 20% |
|
| NTC_18pin 18 | Connected to: GND 40% · not connected 20% · a signal 40% |
|
| VBAT_19pin 19 | Connected to: A connector 60% · VBAT 40% |
|
| VSYS_20pin 20 | Connected to: VSYS 100% |
|
| VBUS_21pin 21 | Connected to: VBUS 80% · a signal 20% |
|
| VBUSOUT_22pin 22 | Connected to: VBUS_MCU 60% · not connected 20% · a signal 20% |
|
| LSIN1/VINLDO1_28pin 28 | Connected to: Not connected 40% · GND 20% · VDD_NRF 40% |
|
| LSOUT1/VOUTLDO1_29pin 29 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| LSIN2/VINLDO2_30pin 30 | Connected to: Not connected 40% · GND 20% · VDD_NRF 40% |
|
| LSOUT2/VOUTLDO2_31pin 31 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| VOUT2_32pin 32 | Connected to: 3.3V 80% · a signal 20% |
|
| AVSS_33pin 33 | Connected to: GND 100% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LM20MeshNode by cvaldess, Sidewalk Devkit by hlord2000, BLE Gauge by N4TH4NB and Board 1 by Triksha-health.
The nPM1300-QEAA in open source designs
The gallery holds 5 open source boards using the nPM1300-QEAA from 5 GitHub repositories; a typical one measures about 54.7 × 50 mm and carries around 55 components.
100% use four copper layers or more, and 40% carry an open source license.
The most starred is Sidewalk Devkit by hlord2000.
Microcontrollers on boards using the nPM1300-QEAA
What boards using the nPM1300-QEAA are built for
nPM1300-QEAA: common questions
Where can I find a nPM1300-QEAA reference design?
Each of the 5 boards on this page is a real design using the nPM1300-QEAA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the nPM1300-QEAA SW2_5 pin connected?
The SW2_5 pin has a inductor on 5 of 5 designs, most often 2.2 µH. Counted from the KiCad layouts of 5 open source designs using the nPM1300-QEAA.
What resistor goes on the nPM1300-QEAA VSET2_16 pin?
The VSET2_16 pin has a resistor to GND on 5 of 5 designs, most often 250 kΩ (then 330 kΩ). Counted from the KiCad layouts of 5 open source designs using the nPM1300-QEAA.
How is the nPM1300-QEAA VBAT_19 pin connected?
The VBAT_19 pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the nPM1300-QEAA.
Which microcontrollers do boards using the nPM1300-QEAA use?
Most are built on Nordic nRF (4) and STM32 (1).
How big is a typical board using the nPM1300-QEAA?
The median is 54.7 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the nPM1300-QEAA?
By GitHub stars, Sidewalk Devkit by hlord2000, with 1 stars.
Can I simulate one of these boards using the nPM1300-QEAA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.