2 open source boards using the PCM3060PW

Real designs built with the PCM3060PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PCM3060PW in open source designs

The gallery holds 2 open source boards using the PCM3060PW from 2 GitHub repositories; a typical one measures about 63.6 × 77.7 mm and carries around 172 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Mp153-carrier board by 4ms.

Parts used alongside the PCM3060PW

Microcontrollers on boards using the PCM3060PW

What boards using the PCM3060PW are built for

PCM3060PW: common questions

Where can I find a PCM3060PW reference design?

Each of the 2 boards on this page is a real design using the PCM3060PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PCM3060PW use?

Most are built on STM32 (1).

How big is a typical board using the PCM3060PW?

The median is 63.6 × 77.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the PCM3060PW?

By GitHub stars, Mp153-carrier board by 4ms, with 1 stars.

Can I simulate one of these boards using the PCM3060PW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part