Hack-Club-Half-Life-Starbie-Project
528390·Hack-Club-Half-Life-Starbie-Project
About the Hack-Club-Half-Life-Starbie-Project PCB
Hack-Club-Half-Life-Starbie-Project is an open source ESP32 PCB design by 528390, published on GitHub. It is a 2-layer board measuring 129 × 100 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
What is this project? Starbie is a small digital pet that runs on a custom-designed printed circuit board (PCB). This project aims to teach PCB design and programming while creating an interactive mini companion.
What is this project? Starbie is a small digital pet that runs on a custom-designed printed circuit board (PCB). This project aims to teach PCB design and programming while creating an interactive mini companion.
How does this project work? Starbie uses a XIAO ESP32-C3 microcontroller to run its program. An OLED screen displays the pet and buttons allow the user to interact with it. An MPU6050 motion sensor lets Starbie react to movement, and a DHT11 sensor provides temperature and humidity readings. There are also customizable actions that are programmed through Arduino including dance…
Main components on the Hack-Club-Half-Life-Starbie-Project
Hack-Club-Half-Life-Starbie-Project bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Hack-Club-Half-Life-Starbie-Project design files
The KiCad project lives in the 528390/Hack-Club-Half-Life-Starbie-Project repository on GitHub; these links point at the commit this page was built from.
- LayoutStarbie.kicad_pcb
- SchematicStarbie.kicad_sch
- BOMStarbie.csv
Hack-Club-Half-Life-Starbie-Project: common questions
What microcontroller does the Hack-Club-Half-Life-Starbie-Project use?
The Hack-Club-Half-Life-Starbie-Project is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Hack-Club-Half-Life-Starbie-Project PCB?
The Hack-Club-Half-Life-Starbie-Project measures 129 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hack-Club-Half-Life-Starbie-Project?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hack-Club-Half-Life-Starbie-Project design files?
From the 528390/Hack-Club-Half-Life-Starbie-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hack-Club-Half-Life-Starbie-Project design in my own project?
The repository has no license, so all rights stay with 528390. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hack-Club-Half-Life-Starbie-Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k