Especcy
5haman·especcy·hardware/electronics/carrier.kicad_pcb
About the Especcy PCB
Especcy is an open source ESP32 PCB design by 5haman, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 20.8 × 34.8 mm, with 21 components from 17 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the TLV75733PDBVR. By type, the board carries 6 switches, 4 capacitors, 4 resistors, 3 connectors, 2 ICs and 1 fuse.
It belongs with the retro computing and test & measurement designs in this gallery.
From the project
Thumb-sized ESP32 ZX Spectrum handheld, 24 × 38 × 12 mm: FreeCAD enclosure, KiCad carrier study and cycle-timed 48K emulator firmware.
Revision A adds editable KiCad 10 carrier and manual-fixture schematics, exact part selections, an unrouted carrier, and reproducible checks. The WROOM, LCD, six control centres and existing enclosure geometry are preserved. This completes the authorized electrical study; physical acceptance and fabrication release remain open.
Open the preview for placement views and schematic SVGs. Open carrier.kicadpro or fixture.kicadpro in KiCad to edit the native circuits. The fixture has a reference schematic only, with no fixture PCB or probe mechanics.
Main components on the Especcy
Especcy bill of materials (BOM)
21 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E-N4 Espressif | ESP32 | U1 |
| 1 | TLV75733PDBVR Texas Instruments | SOT23_5 | U2 |
| 1 | USB3076-30-A Micro-B / power only GCT | USB | J1 |
| 1 | PCB feature LCD wire pads / 26117 Carrier fabricator | LCDPads | J2 |
| 1 | PCB feature Pogo / 3V3 sense only Carrier fabricator | PogoPads | J3 |
| 1 | MF-PSMF075X-2 750mA PPTC Bourns | Fuse | F1 |
| 1 | 2337228-2 Up / 160gf TE Connectivity | TESwitch | SW1 |
| 1 | 2337228-2 Down / 160gf TE Connectivity | TESwitch | SW2 |
| 1 | 2337228-2 Left / 160gf TE Connectivity | TESwitch | SW3 |
| 1 | 2337228-2 Right / 160gf TE Connectivity | TESwitch | SW4 |
| 1 | 2337228-2 Fire / 160gf TE Connectivity | TESwitch | SW5 |
| 1 | 2337228-2 Menu / 160gf TE Connectivity | TESwitch | SW6 |
| 1 | CDSOD323-T05C 5V bidirectional ESD Bourns | TVS | D1 |
| 2 | GRM188R61A106KE69D 10u / 10V X5R Murata | C0603 | C1, C2 |
| 1 | GRM155R71C104KA88D 100n / 16V X7R Murata | C0402 | C3 |
| 1 | GRM155R61A105KE15D 1u / 10V X5R Murata | C0402 | C4 |
| 4 | RC0402FR-0710KL 10k / 1% Yageo | R0402 | R1, R2, R3, R4 |
Especcy design files
The KiCad project lives in the 5haman/especcy repository on GitHub; these links point at the commit this page was built from.
Especcy: common questions
What microcontroller does the Especcy use?
The Especcy is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the Especcy PCB?
The Especcy measures 20.8 × 34.8 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Especcy?
21 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Especcy design files?
From the 5haman/especcy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Especcy design in my own project?
Yes, under the terms of its GPL-3.0 license, which 5haman chose for the repository.
Can I test firmware for the Especcy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k