Esp ir board

abhiramgcos·Esp_ir_board·hardware/esp_ir_board.kicad_pcb

Esp ir board layout, top view — open source ESP32 board by abhiramgcos

About the Esp ir board

Esp ir board is an open source ESP32 PCB design by abhiramgcos, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 68 × 48 mm, with 47 components from 30 distinct parts.

Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the AP2112K-3.3TRG1, USBLC6-2SC6, CH340C and Vishay TSOP38238. By type, the board carries 16 resistors, 9 capacitors, 6 diodes, 5 ICs, 4 connectors and 3 transistors.

It belongs with the iot & wireless and usb & debug tools designs in this gallery.

From the project

A Wi-Fi infrared remote you build yourself. It learns the buttons of your existing remotes (TV, A/C, set-top box, fan, LED strip) and plays them back from your phone, a script or Home Assistant.

A Wi-Fi infrared remote you build yourself. It learns the buttons of your existing remotes (TV, A/C, set-top box, fan, LED strip) and plays them back from your phone, a script or Home Assistant.

Strong IR output: two 940 nm LEDs driven at ~100 mA through a MOSFET, ≈8–10 m line-of-sight range. On-board receiver: a 38 kHz TSOP38238 for learning codes. The receiver and both IR LEDs face out of the same board edge, so one side of the board points at your devices. One-click flashing: USB-C with a CH340C USB-serial chip and auto-reset; no buttons, no adapter. Ready-to-use firmware: web UI, REST…

Esp ir board, from the project README
From the project README

Main components on the Esp ir board

Esp ir board bill of materials (BOM)

47 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E-N4
ESP32-WROOM-32E
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
U2
1
USBLC6-2SC6
U3
1
CH340C
U4
1
Vishay TSOP38238
TSOP38238
U5
2
MMBT3904
Q1, Q2
1
AO3400A
Q3
1
HRO TYPE-C-31-M-12
USB-C
J1
1
2.54 mm header 1x2
EXT 5V
J2
1
2.54 mm header 1x6
UART
J3
1
2.54 mm header 1x14
EXPANSION
J4
1
PTTC SMD1206P075TFT (0.75 A hold, 8 V)
0.75A hold
F1
1
6x6 mm tactile THT
RESET
SW1
1
6x6 mm tactile THT
BOOT
SW2
1
6x6 mm tactile THT
USER
SW3
2
SS14
D1, D2
2
Vishay TSAL6200
TSAL6200
D3, D4
1
KENTO KT-0805G
GREEN
D5
1
KENTO KT-0805B
BLUE
D6
3
22uF 16V X5R 1206
22uF
C1, C5, C10
Show 10 more
QtyPartRefs
2
1UF
1uF
C2, C7
2
10UF
10uF
C3, C11
2
100NF
100nF
C6, C8
2
5.1K
5.1k
R1, R2
5
10K
10k
R3, R4, R6, R7, R14
3
1k
R5, R12, R13
2
100R
R8, R11
1
100K
100k
R9
1
18 ohm 1206 1%
18R
R10
2
4.7K
4.7k
R15, R16

Esp ir board design files

The KiCad project lives in the abhiramgcos/Esp_ir_board repository on GitHub; these links point at the commit this page was built from.

Esp ir board: common questions

What microcontroller does the Esp ir board use?

The Esp ir board is built around the ESP32-WROOM-32E-N4, from the ESP32 family.

How big is the Esp ir board?

The Esp ir board measures 68 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp ir board?

47 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp ir board design files?

From the abhiramgcos/Esp_ir_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp ir board design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which abhiramgcos chose for the repository.

Can I test firmware for the Esp ir board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards