Dsvg

AbhishekGM23·PCB-Design·ADAS/dsvg.kicad_pcb

Dsvg PCB layout, top view — open source ESP32 board by AbhishekGM23

About the Dsvg PCB

Dsvg is an open source ESP32 PCB design by AbhishekGM23, published on GitHub. It is a 2-layer board measuring 105 × 76 mm, with 8 components from 8 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 6 connectors, 1 IC and 1 switch.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains various PCB design projects.

This repository contains various PCB design projects.

ADAS: Advanced Driver Assistance Systems PCB designs. Basic circuits: Collection of basic electronic circuit designs. IoT Water Meter:** PCB design for an Internet of Things (IoT) based smart water meter.

Main components on the Dsvg

Dsvg bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
motor driver 1 control
J1
1
motor driver 2 control
J2
1
Baterry
J3
1
motor driver 1 pwr
J4
1
motor driver 2 pwr
J5
1
ultrasonic sensor
J6
1
SW_Push
SW1

Dsvg design files

The KiCad project lives in the AbhishekGM23/PCB-Design repository on GitHub; these links point at the commit this page was built from.

Dsvg: common questions

What microcontroller does the Dsvg use?

The Dsvg is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Dsvg PCB?

The Dsvg measures 105 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dsvg?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dsvg design files?

From the AbhishekGM23/PCB-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dsvg design in my own project?

The repository has no license, so all rights stay with AbhishekGM23. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dsvg without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB-Design

Similar boards