IoT Water Meter

AbhishekGM23·PCB-Design·IoT Water Meter/IoT Water Meter.kicad_pcb

IoT Water Meter PCB layout, top view — open source ESP32 board by AbhishekGM23

About the IoT Water Meter PCB

IoT Water Meter is an open source ESP32 PCB design by AbhishekGM23, published on GitHub. It is a 2-layer board measuring 62 × 56 mm, with 14 components from 14 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the LM7805_TO220. By type, the board carries 3 connectors, 3 capacitors, 3 resistors, 2 ICs, 1 transistor and 1 LED.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains various PCB design projects.

This repository contains various PCB design projects.

ADAS: Advanced Driver Assistance Systems PCB designs. Basic circuits: Collection of basic electronic circuit designs. IoT Water Meter:** PCB design for an Internet of Things (IoT) based smart water meter.

Main components on the IoT Water Meter

IoT Water Meter bill of materials (BOM)

14 components, 14 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
LM7805_TO220
U2
1
BC547
Q1
1
12v supply
J1
1
Solenoid valve
J2
1
Water flow sensor
J3
1
LED
5v
1
1N4007
D2
1
0.1uF
C1
1
470uF, 16v
C2
1
100uF, 16v
C3
1
5.6k
R1
1
1k
R2
1
220
R3

IoT Water Meter design files

The KiCad project lives in the AbhishekGM23/PCB-Design repository on GitHub; these links point at the commit this page was built from.

IoT Water Meter: common questions

What microcontroller does the IoT Water Meter use?

The IoT Water Meter is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the IoT Water Meter PCB?

The IoT Water Meter measures 62 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IoT Water Meter?

14 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the IoT Water Meter design files?

From the AbhishekGM23/PCB-Design repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the IoT Water Meter design in my own project?

The repository has no license, so all rights stay with AbhishekGM23. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IoT Water Meter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB-Design

Similar boards