Solar charger circuit
AbhishekGM23·PCB-Design·Basic circuits/Solar Charger Circuit/solar charger circuit.kicad_pcb
About the Solar charger circuit PCB
Solar charger circuit is an open source PCB design by AbhishekGM23, published on GitHub. It is a 2-layer board measuring 35 × 20 mm, with 14 components from 9 distinct parts.
Other key parts include the L7812, L7806 and L7805. By type, the board carries 4 connectors, 3 ICs, 3 resistors, 2 diodes and 2 capacitors.
It belongs with the power & battery designs in this gallery.
From the project
This repository contains various PCB design projects.
This repository contains various PCB design projects.
ADAS: Advanced Driver Assistance Systems PCB designs. Basic circuits: Collection of basic electronic circuit designs. IoT Water Meter:** PCB design for an Internet of Things (IoT) based smart water meter.
Main components on the Solar charger circuit
Solar charger circuit bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7812 | TO-220-3_Vertical | U1 |
| 1 | L7806 | TO-220-3_Vertical | U2 |
| 1 | L7805 | TO-220-3_Vertical | U3 |
| 4 | Conn_01x02_Male | PinHeader_1x02_P2.00mm_Vertical | J1, J2, J3, J4 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 1N5204 | D_A-405_P7.62mm_Horizontal | D2 |
| 2 | 4700uF | CP_Radial_D4.0mm_P2.00mm | C1, C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 47 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
Solar charger circuit design files
The KiCad project lives in the AbhishekGM23/PCB-Design repository on GitHub; these links point at the commit this page was built from.
Solar charger circuit: common questions
How big is the Solar charger circuit PCB?
The Solar charger circuit measures 35 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solar charger circuit?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solar charger circuit design files?
From the AbhishekGM23/PCB-Design repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Solar charger circuit design in my own project?
The repository has no license, so all rights stay with AbhishekGM23. Use it as a reference, and ask the author before reusing the design.
More boards in PCB-Design
Positive Battery Charger Circuit
AbhishekGM23
72 × 33 mm36 parts2LNo license0Smart Vibration Sensor Circuit
AbhishekGM23
74 × 22 mm29 parts2LNo license05V to 48V DC converter circuit
AbhishekGM23
53 × 21 mm24 parts2LNo license0Noise or Sound Sensor Alarm Circuit using IC 555
AbhishekGM23
66 × 17 mm24 parts2LNo license0Simple Radio Circuit Using LM358 IC
AbhishekGM23
47 × 20 mm19 parts2LNo license0Low battery voltage alram circuit
AbhishekGM23
39 × 22 mm17 parts2LNo license0IR Proximity Automatic Soap Dispenser Circuit
AbhishekGM23
47 × 22 mm16 parts2LNo license0+ - 9V dual power supply
AbhishekGM23
53 × 16 mm15 parts2LNo license0Variable pwr supply circuit
AbhishekGM23
42 × 19 mm15 parts2LNo license0ESP32
IoT Water Meter
AbhishekGM23
62 × 56 mm14 parts2LNo license0ESP32
Dsvg
AbhishekGM23
105 × 76 mm8 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k