HardLabs

Escorna Ogaki CPU 1 0

abierto-cc·escornabot·Ogaki/hardware/KiCad files/Ogaki.kicad_pcb

Escorna Ogaki CPU 1 0 PCB layout, top view — open source ESP8266 board by abierto-cc

About the Escorna Ogaki CPU 1 0 PCB

Escorna Ogaki CPU 1 0 is an open source ESP8266 PCB design by abierto-cc, published on GitHub. It is a 2-layer board measuring 55 × 110.1 mm, with 73 components from 36 distinct parts.

Its main chip is the ESP01, from the ESP8266 family. Other key parts include the ULN2803 and LM1117-SOT. By type, the board carries 23 resistors, 11 switches, 8 LEDs, 7 ICs, 6 capacitors and 2 fuses.

It belongs with the robotics & motion designs in this gallery.

From the project

Diseño de robot basado en el Escornabot, completamente hecho en KiCAD. Con amor para todo el mundo desde Malmo - Suecia.

Diseño de robot basado en el Escornabot, completamente hecho en KiCAD.

Con amor para todo el mundo desde Malmo - Suecia.

Si quieres conseguir el kit para montarlo, visita: https://abierto.cc/shop

Puedes ver las instrucciones de montaje paso a paso en: https://sites.google.com/abierto.cc/ogaki

Los creadores originales de Escornabot y su comunidad de usuarios y desarrolladores

Main components on the Escorna Ogaki CPU 1 0

ULN2803ESP01LM1117-SOT

Escorna Ogaki CPU 1 0 bill of materials (BOM)

73 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ULN2803
IC1
4
CONN_01X04
U1, U3, U4, U5
1
ESP01
U2
1
LM1117-SOT
U6
1
Screw_Terminal_1x02
X1
1
FUSE
F1
1
FUSE
F1.1
1
CONN_01X02
JP1
1
CONN_01X02
JP2
5
switch
S1, S2, S3, S4, S5
5
switch
S1.1, S2.1, S3.1, S4.1, S5.1
1
switch
S7
1
GS3
SJ1
1
JUMPER
SJ2
1
CONN_02X08
SV1
2
CONN_01X17
SV2, SV3
2
CONN_01X09
SV4, SV6
2
CONN_01X05
XH3, XH4
1
buzzer
Z1
1
G***
svg2mod
Show 16 more
QtyPartRefs
4
L
LED1, LED2, LED3, LED4
4
L
LED1.1, LED2.1, LED3.1, LED4.1
1
ZENER
D1
1
ZENER
D1.1
1
100nF
C2
1
100nF
C2.1
2
10uF
C3, C4
2
10uF
C3.1, C4.1
5
10K
R1, R2, R3, R6, R14
9
10K
R1.1, R2.2, R3.1, R4.1, R5.1, R7.1, R12.1, R14A.1 +1
2
1K
R4, R5
3
1K
R6.1, R8.1, R9.1
1
100R
R10.1
1
10K
R12
1
18K
R13
1
18K
R13.1

Escorna Ogaki CPU 1 0 design files

The KiCad project lives in the abierto-cc/escornabot repository on GitHub; these links point at the commit this page was built from.

Escorna Ogaki CPU 1 0: common questions

What microcontroller does the Escorna Ogaki CPU 1 0 use?

The Escorna Ogaki CPU 1 0 is built around the ESP01, from the ESP8266 family.

How big is the Escorna Ogaki CPU 1 0 PCB?

The Escorna Ogaki CPU 1 0 measures 55 × 110.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Escorna Ogaki CPU 1 0?

73 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Escorna Ogaki CPU 1 0 design files?

From the abierto-cc/escornabot repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Escorna Ogaki CPU 1 0 design in my own project?

The repository has no license, so all rights stay with abierto-cc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Escorna Ogaki CPU 1 0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in escornabot

Similar boards