3 open source boards using the LM1117-SOT

Real designs built with the LM1117-SOT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LM1117-SOT in open source designs

The gallery holds 3 open source boards using the LM1117-SOT from 2 GitHub repositories; a typical one measures about 55 × 110.1 mm and carries around 73 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Escorna Ogaki CPU 1 0 by abierto-cc.

Microcontrollers on boards using the LM1117-SOT

What boards using the LM1117-SOT are built for

LM1117-SOT: common questions

Where can I find a LM1117-SOT reference design?

Each of the 3 boards on this page is a real design using the LM1117-SOT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM1117-SOT use?

Most are built on ESP8266 (2) and STM32 (1).

How big is a typical board using the LM1117-SOT?

The median is 55 × 110.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM1117-SOT?

By GitHub stars, Escorna Ogaki CPU 1 0 by abierto-cc, with 13 stars.

Can I simulate one of these boards using the LM1117-SOT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part