Walkure motherboard
About-Time-Technologies·roh-breakouts·walkure-motherboard/walkure-motherboard.kicad_pcb
About the Walkure motherboard PCB
Walkure motherboard is an open source ESP32 PCB design by About-Time-Technologies, published on GitHub. It is a 2-layer board measuring 240 × 100 mm, with 44 components from 11 distinct parts.
Its main chip is the ESP-32-S3-Zero - PTH, from the ESP32 family. Other key parts include the DS18B20Z and TXB0102DCU. By type, the board carries 22 connectors, 10 ICs, 8 jumpers, 3 diodes and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Walkure motherboard
Walkure motherboard bill of materials (BOM)
44 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | ~ A6211GLJTR-T | MHCI-A6211 | U1, U3, U4, U5, U6, U7 |
| 1 | ~ | MHCI-DMX | U2 |
| 1 | ~ | ESP-32-S3-Zero - PTH | U8 |
| 1 | DS18B20Z | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | TXB0102DCU | VSSOP-8_2.3x2mm_P0.5mm | U13 |
| 10 | Conn_01x02 | 2060-452-998-404 Wago | J1, J2, J3, J4, J5, J6, J7, J8 +2 |
| 4 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J11, J20, J21, J22 |
| 8 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J12, J13, J14, J15, J16, J17, J18, J19 |
| 1 | Fuse | Keystone 4628 | F1 |
| 8 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP6, JP7, JP8, JP9 |
| 3 | D_Schottky | D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp | D1, D2, D3 |
Walkure motherboard design files
The KiCad project lives in the About-Time-Technologies/roh-breakouts repository on GitHub; these links point at the commit this page was built from.
Walkure motherboard: common questions
What microcontroller does the Walkure motherboard use?
The Walkure motherboard is built around the ESP-32-S3-Zero - PTH, from the ESP32 family.
How big is the Walkure motherboard PCB?
The Walkure motherboard measures 240 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Walkure motherboard?
44 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Walkure motherboard design files?
From the About-Time-Technologies/roh-breakouts repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Walkure motherboard design in my own project?
The repository has no license, so all rights stay with About-Time-Technologies. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Walkure motherboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in roh-breakouts
Tps922055
About-Time-Technologies
60 × 25 mm27 parts2LNo license012-to-24-boost-4A
About-Time-Technologies
89.5 × 36.2 mm27 parts2LNo license0Crmx timo
About-Time-Technologies
44.5 × 30.5 mm26 parts2LNo license0A6211
About-Time-Technologies
60 × 25 mm25 parts2LNo license0Iso dmx
About-Time-Technologies
19.1 × 23.5 mm12 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k