7 open source boards using the DS18B20Z
Real designs built with the DS18B20Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Wiscale hw
makerspacelt
100 × 50 mm107 parts2LNo license0AVR/Arduino
Simple incubator
Hackuarium
100 × 73.7 mm45 parts2LNo license0ESP32
Walkure motherboard
About-Time-Technologies
240 × 100 mm44 parts2LNo license0ESP32
Twomes temp monitor hardware
energietransitie
73 × 77 mm40 parts2LCERN-OHL-P-2.00Display board
mckay27
100 × 103.5 mm57 parts2LNo license0NFH PipeSensors
energietransitie
40 × 15 mm3 parts2LCERN-OHL-P-2.00NFH PipeSensors
energiegedrag-nl
40 × 15 mm3 parts2LCERN-OHL-P-2.00
How designs wire the DS18B20Z
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the DS18B20Z connects to, and the resistors, capacitors and other passives placed on it.
- The GND pin has a series capacitor on 3 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 2, 6, 7, 8 | Connected to: Not connected 100% | — |
| VDDpin 3 | Connected to: 3.3V 57% · a signal 43% |
|
| GNDpin 5 | Connected to: GND 57% · a signal 43% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Walkure motherboard by About-Time-Technologies, NFH PipeSensors by energiegedrag-nl, NFH PipeSensors by energietransitie and Twomes temp monitor hardware by energietransitie.
The DS18B20Z in open source designs
The gallery holds 7 open source boards using the DS18B20Z from 7 GitHub repositories; a typical one measures about 99.9 × 73.7 mm and carries around 44 components.
100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Wiscale hw by makerspacelt.
Parts used alongside the DS18B20Z
Microcontrollers on boards using the DS18B20Z
What boards using the DS18B20Z are built for
DS18B20Z: common questions
Where can I find a DS18B20Z reference design?
Each of the 7 boards on this page is a real design using the DS18B20Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS18B20Z GND pin connected?
The GND pin has a series capacitor on 3 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the DS18B20Z.
Which microcontrollers do boards using the DS18B20Z use?
Most are built on ESP32 (2), AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the DS18B20Z?
The median is 99.9 × 73.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the DS18B20Z?
By GitHub stars, Wiscale hw by makerspacelt, with 0 stars.
Can I simulate one of these boards using the DS18B20Z before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.