15 open source boards using the TXB0102DCU

Real designs built with the TXB0102DCU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the TXB0102DCU

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the TXB0102DCU connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF (then 100 µF).
  • The VCCB pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF).
  • The OE pin has a pull-up to 3.3V on 7 of 14 designs, most often 10 kΩ (then 0 Ω).
  • The B2 pin has a series resistor on 6 of 14 designs, most often 0 Ω (then 499 Ω).
B2pin 1Connected to: A connector 43%
  • Series resistor on 43% · 0 Ω (5), 499 Ω (1), 10 Ω (1)
GNDpin 2Connected to: GND 100%
VCCApin 3Connected to: 3.3V 93%
  • Decoupling capacitor on 71% · 100 nF (13), 100 µF (1)
OEpin 6Connected to: Signal 64% · 3.3V 36%
  • Pull-up to 3.3V on 50% · 10 kΩ (4), 0 Ω (2), 5 kΩ (1)
VCCBpin 7Connected to: 5V 64% · a signal 36%
  • Decoupling capacitor on 64% · 100 nF (10), 10 µF (2), 10 nF (1)
B1pin 8Connected to: A connector 36%, the microcontroller 21%
  • Series resistor on 36% · 0 Ω (4), 10 Ω (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Black-Flipper by Broccoliux, Halberd v2 by RemkoPr, Kallisto by Fredrik-Reinholdsen and MHCI-Fader by About-Time-Technologies.

The TXB0102DCU in open source designs

The gallery holds 15 open source boards using the TXB0102DCU from 14 GitHub repositories; a typical one measures about 107.5 × 82 mm and carries around 86 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Black-Flipper by Broccoliux.

Parts used alongside the TXB0102DCU

Microcontrollers on boards using the TXB0102DCU

TXB0102DCU: common questions

Where can I find a TXB0102DCU reference design?

Each of the 15 boards on this page is a real design using the TXB0102DCU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXB0102DCU VCCA pin?

The VCCA pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 14 open source designs using the TXB0102DCU.

What decoupling capacitors do designs use on the TXB0102DCU VCCB pin?

The VCCB pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the TXB0102DCU.

What pull-up resistor is used on the TXB0102DCU OE pin?

The OE pin has a pull-up to 3.3V on 7 of 14 designs, most often 10 kΩ (then 0 Ω). Counted from the KiCad layouts of 14 open source designs using the TXB0102DCU.

Which microcontrollers do boards using the TXB0102DCU use?

Most are built on ESP32 (4), STM32 (4), AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the TXB0102DCU?

The median is 107.5 × 82 mm, and 60% are two-layer designs.

What is the most popular open source board using the TXB0102DCU?

By GitHub stars, Black-Flipper by Broccoliux, with 7 stars.

Can I simulate one of these boards using the TXB0102DCU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part