Absolut-CAS
AbuPaad·Absolut-CAS·hardware/CALCAGAINFINALFINALFINAL/kicad-files/Cfx-port.kicad_pcb
About the Absolut-CAS PCB
Absolut-CAS is an open source ESP32 PCB design by AbuPaad, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 65 × 135.9 mm, with 45 components from 25 distinct parts.
Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. Other key parts include the TP4056-42-ESOP8 and TCA9535DBR. By type, the board carries 20 resistors, 8 diodes, 6 capacitors, 3 ICs, 3 connectors and 1 transistor.
It belongs with the power & battery, iot & wireless and displays & leds designs in this gallery.
From the project
Hardware mod for Casio FX-82/991ES calculators intended to be used with the NumOS project
KiCad project for the NumOS Casio Port. It replaces the original board inside a stock Casio fx-82 / fx-991 with an ESP32-S3, a colour screen interface and a oem compatible keypad matrix — reusing the calculator's own shell and buttons.
- U8 — ESP32-S3-WROOM-1. Does everything/core MCU. - U7 — TCA9555DBR (16-bit I²C expander, SSOP-24). Reads the keypad matrix, so the whole keypad costs the MCU two pins instead of fifteen. - S1 — 40-pin 0.5 mm FPC connector. This is what the ILI9341 2.4" 320×240 panel plugs into. - U5 — TP4056-42-ESOP8. Li-ion charge management for battery. - Q1 — DMP3099L…
Main components on the Absolut-CAS
Absolut-CAS bill of materials (BOM)
45 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | TCA9535DBR | SSOP-24_5.3x8.2mm_P0.65mm | U7 |
| 1 | ESP32-S3-WROOM-2 | ESP32-S3-WROOM-2 | U8 |
| 1 | DMP3099L | SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | Micro_SD_Card | CONN_TF-01A_HRO | J3 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 2 | SW_Push_SPST_NO_Alps_SKRK | SW_Push_SPST_NO_Alps_SKRK | B1, B2 |
| 1 | CONN40_AFC01-S40FCA-00_JUS | CONN40_AFC01-S40FCA-00_JUS | S1 |
| 1 | idk | SOT-23 | SOt-23 |
| 3 | D_SOD-123 | D_SOD-123 | D1, D2, D3 |
| 1 | 1N5819 | Nexperia_CFP3_SOD-123W | D4 |
| 2 | LED | D_0603_1608Metric | D5, D6 |
| 2 | 10uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | d7, d8 |
| 1 | 0.1 | C_0603_1608Metric | C1 |
| 1 | 10uf | C_0603_1608Metric | C2 |
| 1 | 10µF | C_0603_1608Metric | C3 |
| 3 | 1µF | C_0603_1608Metric | C4, C5, C6 |
| 2 | 1k | R_0603_1608Metric | R1, R2 |
| 2 | 5.1k | R_0603_1608Metric | R3, r19 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7k | R_0603_1608Metric | R5, r4 |
| 9 | 10k | R_0603_1608Metric | R6, R7, R8, R9, R10, r11, r12, r13 +1 |
| 1 | 1.2 | R_0603_1608Metric | R12 |
| 1 | 510 | R_0603_1608Metric | R17 |
| 3 | 100k | R_0603_1608Metric | r14, r15, r16 |
Absolut-CAS design files
The KiCad project lives in the AbuPaad/Absolut-CAS repository on GitHub; these links point at the commit this page was built from.
Absolut-CAS: common questions
What microcontroller does the Absolut-CAS use?
The Absolut-CAS is built around the ESP32-S3-WROOM-2, from the ESP32 family.
How big is the Absolut-CAS PCB?
The Absolut-CAS measures 65 × 135.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Absolut-CAS?
45 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Absolut-CAS design files?
From the AbuPaad/Absolut-CAS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Absolut-CAS design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which AbuPaad chose for the repository.
Can I test firmware for the Absolut-CAS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k