JL checkpoint
acastles91·lifeSequencer·JL/JL_checkpoint.kicad_pcb
About the JL checkpoint PCB
JL checkpoint is an open source PCB design by acastles91, published on GitHub. It is a 4-layer board measuring 1204.3 × 557.2 mm, with 223 components from 48 distinct parts.
Other key parts include the TL074, SN74HC08, L7806, LMC555xM and 4017. By type, the board carries 56 connectors, 47 diodes, 44 capacitors, 27 resistors, 25 ICs and 7 switches.
Main components on the JL checkpoint
JL checkpoint bill of materials (BOM)
223 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U1, U3, U4, U6, U7, U9, U10, U12 +5 |
| 5 | SN74HC08 | SOIC-14_3.9x8.7mm_P1.27mm | U2, U5, U8, U11, U13 |
| 1 | L7806 | TO-263-2 | U19 |
| 2 | LMC555xM | SOIC-8_3.9x4.9mm_P1.27mm | U23, U24 |
| 2 | 4017 | SOP-16_4.55x10.3mm_P1.27mm | U25, U26 |
| 1 | LM2675-5-WSON-16 | WSON-16-1EP_5.0x5.0mm_P0.5mm_EP2.6x2.6mm | U41 |
| 1 | AQ-A_Solid_State_Relay | TerminalBlock_WAGO_236-404_1x04_P5.00mm_45Degree | U701 |
| 1 | IRF5305-Reverse-Polarity | TO-263-3_TabPin2 | Q1 |
| 1 | BC817 | SOT-23 | Q701 |
| 2 | AudioJack2 | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | J1, J69 |
| 34 | Screw_Terminal_01x02 | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | J3, J11, J12, J19, J20, J23, J24, J27 +26 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | J4 |
| 17 | Conn_01x10 | PinSocket_2x05_P2.54mm_Vertical | J10, J18, J22, J26, J30, J34, J38, J42 +9 |
| 2 | Conn_02x32_Odd_Even | PinHeader_2x32_P2.54mm_Vertical | J85, J87 |
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ALQ305 | RELAY_ALQ3_PAN | K701 |
| 3 | R_Potentiometer_US | Potentiometer_Bourns_3314J_Vertical | RV1, RV2, RV20 |
| 1 | R_Potentiometer_US | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | RV5 |
| 1 | R_Potentiometer_US | POT_SEGOR_10K | RV701 |
| 4 | SW_SPST | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | SW1, SW10, SW702, SW703 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_SPDT | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | SW8 |
| 2 | SW_Push | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | SW9, SW701 |
| 5 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP3, TP4, TP5 |
| 39 | D | D_SOD-123 | D1, D2, D3, D10, D11, D16, D17, D23 +31 |
| 1 | ESD5Zxx | D_SOD-523 | D4 |
| 1 | D_Zener-10V | D_SOD-123 | D5 |
| 1 | D_Schottky B230A | D_SOD-123F | D6 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D7, D8 |
| 2 | LED | LED_Luminus_MP-3030-1100_3.0x3.0mm | D21, D22 |
| 1 | LED | LED_D5.0mm | D702 |
| 1 | 4.7uH | L_Wuerth_MAPI-3015 | L1 |
| 2 | L | L_Wuerth_MAPI-3015 | L2, L3 |
| 20 | 0.1uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +12 |
| 1 | 15uF - 50V | C_0402_1005Metric | C16 |
| 1 | 0.33uF | C_0805_2012Metric | C19 |
| 1 | 10nF | C_0402_1005Metric | C21 |
| 3 | 0.1uF | C_0805_2012Metric | C22, C82, C87 |
| 1 | 68uF-16V | C_0805_2012Metric | C23 |
| 4 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C24, C25, C26, C27 |
| 7 | C | C_0805_2012Metric | C34, C36, C37, C38, C39, C702, C703 |
| 1 | C_Polarized | CP_Elec_6.3x7.7 | C35 |
| 2 | C_Polarized | CP_Elec_10x12.6 | C83, C85 |
| 2 | C_Polarized-1uF | CP_Elec_4x4.5 | C84, C86 |
| 1 | C | C_0402_1005Metric | C701 |
| 23 | R_US | R_1206_3216Metric | R1, R3, R5, R6, R7, R11, R12, R13 +15 |
| 2 | 0R | R_1206_3216Metric | R2, R4 |
| 1 | 0 | R_1206_3216Metric | R9 |
| 1 | 100K | R_1206_3216Metric | R10 |
JL checkpoint design files
The KiCad project lives in the acastles91/lifeSequencer repository on GitHub; these links point at the commit this page was built from.
- LayoutJL/JL_checkpoint.kicad_pcb
- SchematicJL/JL_checkpoint.kicad_sch
JL checkpoint: common questions
How big is the JL checkpoint PCB?
The JL checkpoint measures 1204.3 × 557.2 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the JL checkpoint?
223 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the JL checkpoint design files?
From the acastles91/lifeSequencer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JL checkpoint design in my own project?
The repository has no license, so all rights stay with acastles91. Use it as a reference, and ask the author before reusing the design.