Main board rev1
acastles91·lifeSequencer·JL/rev-1-sections/main-board-rev1.kicad_pcb
About the Main board rev1
Main board rev1 is an open source PCB design by acastles91, published on GitHub. It is a 4-layer board measuring 480 × 172.5 mm, with 145 components from 43 distinct parts.
Other key parts include the TL074, LM2675-5-WSON-16, L7806, LMC555xM and SN74HC08. By type, the board carries 41 capacitors, 27 diodes, 24 ICs, 21 resistors, 16 connectors and 4 switches.
Main components on the Main board rev1
Main board rev1 bill of materials (BOM)
145 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U2, U408, U409, U410, U411, U412, U413, U414 +5 |
| 1 | LM2675-5-WSON-16 | WSON-16-1EP_5.0x5.0mm_P0.5mm_EP2.6x2.6mm | U201 |
| 1 | L7806 | TO-263-2 | U202 |
| 2 | LMC555xM | SOIC-8_3.9x4.9mm_P1.27mm | U301, U302 |
| 5 | SN74HC08 | SOIC-14_3.9x8.7mm_P1.27mm | U401, U402, U403, U405, U407 |
| 2 | 4017 | SOP-16_4.55x10.3mm_P1.27mm | U404, U406 |
| 1 | IRF5305-Reverse-Polarity | TO-263-3_TabPin2 | Q201 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 8 | Conn_01x10 | PinSocket_2x05_P2.54mm_Vertical | J101, J102, J103, J104, J105, J106, J107, J108 |
| 1 | Conn_02x32_Odd_Even | PinHeader_2x32_P2.54mm_Vertical | J117 |
| 2 | AudioJack2 | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | J119, J120 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | J201, J503, J504 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | J202 |
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP201 |
| 3 | R_Potentiometer_US | Potentiometer_Bourns_3314J_Vertical | RV101, RV102, RV103 |
| 1 | R_Potentiometer_US | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | RV301 |
| 2 | SW_SPST | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | SW201, SW401 |
| 1 | SW_SPDT | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | SW301 |
| 1 | SW_Push | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | SW302 |
| 3 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP203, TP204, TP401 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 20 | D | D_SOD-123 | D101, D102, D103, D104, D105, D106, D107, D108 +12 |
| 1 | ESD5Zxx | D_SOD-523 | D201 |
| 1 | D_Zener-10V | D_SOD-123 | D202 |
| 1 | D_Schottky B230A | D_SOD-123F | D203 |
| 4 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D204, D205, D301, D302 |
| 1 | 4.7uH | L_Wuerth_MAPI-3015 | L201 |
| 2 | L | L_Wuerth_MAPI-3015 | L202, L203 |
| 20 | 0.1uF | C_0402_1005Metric | C1, C401, C402, C403, C404, C405, C406, C407 +12 |
| 1 | 15uF - 50V | C_0402_1005Metric | C201 |
| 1 | 0.33uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C202 |
| 1 | 10nF | C_0402_1005Metric | C203 |
| 7 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C204, C206, C207, C209, C210, C304, C309 |
| 1 | 68uF-16V | C_0805_2012Metric | C205 |
| 2 | C_Polarized | CP_Elec_10x12.6 | C208, C211 |
| 4 | 0.1uF | C_0805_2012Metric | C301, C305, C306, C307 |
| 1 | C_Polarized 100uF | CP_Elec_6.3x7.7 | C302 |
| 2 | C_Polarized-1uF | CP_Elec_4x4.5 | C303, C308 |
| 1 | 2uF | C_0805_2012Metric | C310 |
| 17 | R_US | R_1206_3216Metric | R101, R103, R105, R106, R107, R203, R204, R205 +9 |
| 1 | 1000K | R_1206_3216Metric | R102 |
| 1 | 0R | R_1206_3216Metric | R104 |
| 1 | 0 | R_1206_3216Metric | R201 |
| 1 | 100K | R_1206_3216Metric | R202 |
Main board rev1 design files
The KiCad project lives in the acastles91/lifeSequencer repository on GitHub; these links point at the commit this page was built from.
Main board rev1: common questions
How big is the Main board rev1?
The Main board rev1 measures 480 × 172.5 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Main board rev1?
145 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main board rev1 design files?
From the acastles91/lifeSequencer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Main board rev1 design in my own project?
The repository has no license, so all rights stay with acastles91. Use it as a reference, and ask the author before reusing the design.