JL-rev1
acastles91·lifeSequencer·JL/JL-rev1.kicad_pcb
About the JL-rev1 PCB
JL-rev1 is an open source PCB design by acastles91, published on GitHub. It is a 4-layer board measuring 500 × 272.5 mm, with 298 components from 49 distinct parts.
Other key parts include the TL074, LM2675-5-WSON-16, L7806, LMC555xM and SN74HC08. By type, the board carries 63 diodes, 56 capacitors, 52 connectors, 51 resistors, 29 ICs and 19 switches.
Main components on the JL-rev1
JL-rev1 bill of materials (BOM)
298 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U2, U408, U409, U410, U411, U412, U413, U414 +5 |
| 1 | LM2675-5-WSON-16 | WSON-16-1EP_5.0x5.0mm_P0.5mm_EP2.6x2.6mm | U201 |
| 1 | L7806 | TO-263-2 | U202 |
| 2 | LMC555xM | SOIC-8_3.9x4.9mm_P1.27mm | U301, U302 |
| 5 | SN74HC08 | SOIC-14_3.9x8.7mm_P1.27mm | U401, U402, U403, U405, U407 |
| 2 | 4017 | SOP-16_4.55x10.3mm_P1.27mm | U404, U406 |
| 5 | AQ-A_Solid_State_Relay | TerminalBlock_WAGO_236-404_1x04_P5.00mm_45Degree | U501, U502, U503, U504, U505 |
| 1 | IRF5305-Reverse-Polarity | TO-263-3_TabPin2 | Q201 |
| 5 | BC817 | SOT-23 | Q501, Q502, Q503, Q504, Q505 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 24 | Screw_Terminal_01x02 | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | J2, J3, J4, J5, J6, J7, J8, J9 +16 |
| 21 | Conn_01x10 | PinSocket_2x05_P2.54mm_Vertical | J101, J102, J103, J104, J105, J106, J107, J108 +13 |
| 2 | Conn_02x32_Odd_Even | PinHeader_2x32_P2.54mm_Vertical | J117, J118 |
| 2 | AudioJack2 | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | J119, J120 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | J202, J203 |
| 2 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP201, JP202 |
| 5 | ALQ305 | RELAY_ALQ3_PAN | K501, K502, K503, K504, K505 |
| 3 | R_Potentiometer_US | Potentiometer_Bourns_3314J_Vertical | RV101, RV102, RV103 |
| 1 | R_Potentiometer_US | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | RV301 |
| 5 | R_Potentiometer_US | POT_SEGOR_10K | RV501, RV502, RV503, RV504, RV505 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | SW_SPST | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | SW201, SW401, SW502, SW503, SW505, SW506, SW508, SW509 +4 |
| 1 | SW_SPDT | TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree | SW301 |
| 6 | SW_Push | TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree | SW302, SW501, SW504, SW507, SW510, SW513 |
| 3 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP203, TP204, TP401 |
| 51 | D | D_SOD-123 | D101, D102, D103, D104, D105, D106, D107, D108 +43 |
| 1 | ESD5Zxx | D_SOD-523 | D201 |
| 1 | D_Zener-10V | D_SOD-123 | D202 |
| 1 | D_Schottky B230A | D_SOD-123F | D203 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D204, D205 |
| 2 | LED | LED_Luminus_MP-3030-1100_3.0x3.0mm | D301, D302 |
| 5 | LED | LED_D5.0mm | D502, D506, D510, D514, D518 |
| 1 | 4.7uH | L_Wuerth_MAPI-3015 | L201 |
| 2 | L | L_Wuerth_MAPI-3015 | L202, L203 |
| 20 | 0.1uF | C_0402_1005Metric | C1, C401, C402, C403, C404, C405, C406, C407 +12 |
| 1 | 15uF - 50V | C_0402_1005Metric | C201 |
| 1 | 0.33uF | C_0805_2012Metric | C202 |
| 1 | 10nF | C_0402_1005Metric | C203 |
| 3 | 0.1uF | C_0805_2012Metric | C204, C304, C309 |
| 1 | 68uF-16V | C_0805_2012Metric | C205 |
| 4 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C206, C207, C209, C210 |
| 2 | C_Polarized | CP_Elec_10x12.6 | C208, C211 |
| 15 | C | C_0805_2012Metric | C301, C305, C306, C307, C310, C502, C503, C505 +7 |
| 1 | C_Polarized | CP_Elec_6.3x7.7 | C302 |
| 2 | C_Polarized-1uF | CP_Elec_4x4.5 | C303, C308 |
| 5 | C | C_0402_1005Metric | C501, C504, C507, C510, C513 |
| 47 | R_US | R_1206_3216Metric | R101, R103, R105, R106, R107, R203, R204, R205 +39 |
| 2 | 0R | R_1206_3216Metric | R102, R104 |
| 1 | 0 | R_1206_3216Metric | R201 |
| 1 | 100K | R_1206_3216Metric | R202 |
JL-rev1 design files
The KiCad project lives in the acastles91/lifeSequencer repository on GitHub; these links point at the commit this page was built from.
- LayoutJL/JL-rev1.kicad_pcb
- SchematicJL/JL-rev1.kicad_sch
JL-rev1: common questions
How big is the JL-rev1 PCB?
The JL-rev1 measures 500 × 272.5 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the JL-rev1?
298 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the JL-rev1 design files?
From the acastles91/lifeSequencer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JL-rev1 design in my own project?
The repository has no license, so all rights stay with acastles91. Use it as a reference, and ask the author before reusing the design.
More boards in lifeSequencer
Earlier revisions in the repo: JL