Poe32net original
adamjezek98·poe32net-original
About the Poe32net original PCB
Poe32net original is an open source ESP32 PCB design by adamjezek98, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 70 × 90 mm, with 74 components from 40 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the LM2576HVS-12, LAN8720A, LM2576S-3.3 and TPS2378. By type, the board carries 25 resistors, 18 connectors, 11 capacitors, 6 ICs, 6 diodes and 2 transistors.
Main components on the Poe32net original
Poe32net original bill of materials (BOM)
74 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Transformer_Ethernet_HALO_TG111-MSC13 | U1 |
| 1 | LM2576HVS-12 | TO-263-5_TabPin3 | U2 |
| 1 | LAN8720A | VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U3 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U4 |
| 1 | LM2576S-3.3 | TO-263-5_TabPin3 | U5 |
| 1 | TPS2378 | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm_ThermalVias | U6 |
| 2 | BC817 | SOT-23 | Q1, Q2 |
| 1 | 25M | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | RJ45_LED_Shielded | RJ45_Amphenol_RJHSE538X | J1 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 2 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J3, J4 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J5, J6, J7 |
| 2 | Conn_01x02 | Molex_SL_171971-0002_1x02_P2.54mm_Vertical | J8, J9 |
| 9 | 01x03 | PinHeader_1x03_P2.54mm_Vertical | J10, J11, J12, J13, J14, J15, J16, J17 +1 |
| 1 | 15W | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | 30W | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 2 | D_Bridge_+-AA | Diode_Bridge_Diotec_ABS | D1, D2 |
| 1 | LED BLUE | LED_0805_2012Metric | D3 |
| 1 | LED GREEN | LED_0805_2012Metric | D4 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | D_Schottky | D_SOD-128 | D5, D6 |
| 2 | L | L_12x12mm_H6mm | L1, L2 |
| 2 | 30pF | C_1206_3216Metric | C1, C2 |
| 3 | 100nF | C_1206_3216Metric | C3, C6, C10 |
| 1 | 10nF | C_1206_3216Metric | C4 |
| 1 | 2.2uF | C_1206_3216Metric | C5 |
| 1 | 10uF | C_1206_3216Metric | C7 |
| 1 | 100uF | C_Elec_10x10.2 | C8 |
| 2 | 1000uF | C_Elec_10x10.2 | C9, C12 |
| 4 | 49R9 | R_0805_2012Metric | R1, R2, R3, R4 |
| 11 | 10K | R_0805_2012Metric | R5, R6, R7, R8, R9, R10, R15, R16 +3 |
| 1 | 12.1K | R_0805_2012Metric | R11 |
| 2 | 68R | R_0805_2012Metric | R12, R13 |
| 1 | 0R | R_1206_3216Metric | R14 |
| 1 | 25k | R_0805_2012Metric | R18 |
| 1 | 63R4 | R_0805_2012Metric | R19 |
| 1 | 90R9 | R_0805_2012Metric | R21 |
| 1 | 500R | R_0805_2012Metric | R23 |
| 1 | 4K7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R24 |
| 1 | 65R | R_0805_2012Metric | R25 |
Poe32net original design files
The KiCad project lives in the adamjezek98/poe32net-original repository on GitHub; these links point at the commit this page was built from.
Poe32net original: common questions
What microcontroller does the Poe32net original use?
The Poe32net original is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Poe32net original PCB?
The Poe32net original measures 70 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Poe32net original?
74 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Poe32net original design files?
From the adamjezek98/poe32net-original repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Poe32net original design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which adamjezek98 chose for the repository.
Can I test firmware for the Poe32net original without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k