34 open source boards using the LAN8720A

Real designs built with the LAN8720A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

34 boardsClear filters|Most starred

How designs wire the LAN8720A

Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the LAN8720A connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDCR pin has a capacitor to GND on 23 of 24 designs, most often 1 µF (then 100 nF).
  • The RBIAS pin has a resistor to GND on 23 of 24 designs, most often 12.1 kΩ (then 49.9 Ω).
  • The VDD1A pin has a capacitor to GND on 21 of 24 designs, most often 100 nF (then 1 µF).
  • The VDD2A pin has a capacitor to GND on 19 of 24 designs, most often 100 nF (then 1 µF).
VDD2Apin 1Connected to: A connector 21% · 3.3V 46%
  • Capacitor to GND on 79% · 100 nF (41), 1 µF (3), 470 pF (2)
  • Series resistor on 33% · 49.9 Ω (21), 0 Ω (1)
LED2/INTSELpin 2Connected to: A connector 25%
  • Series resistor on 63% · 270 Ω (7), 1 kΩ (3), 470 Ω (1)
  • Resistor to GND on 33% · 10 kΩ (6), 1 kΩ (1), 12 kΩ (1)
LED1/REGOFFpin 3Connected to: A connector 21%
  • Series resistor on 63% · 270 Ω (6), 1 kΩ (3), 470 Ω (1)
XTAL2pin 4Connected to: Not connected 54% · a signal 46%
  • Crystal on 46% · 25 MHz (10)
  • Capacitor to GND on 46% · 10 pF (5), 5.6 pF (1), 27 pF (1)
XTAL1/CLKINpin 5Connected to: Signal 100%
  • Series resistor on 50% · 33 Ω (5), 22 Ω (3), 1 MΩ (2)
  • Crystal on 46% · 25 MHz (10)
  • Capacitor to GND on 46% · 10 pF (5), 5.6 pF (1), 27 pF (1)
VDDCRpin 6Connected to: Signal 58% · VDDCR 42%
  • Capacitor to GND on 96% · 1 µF (16), 100 nF (13), 470 pF (12)
RXD1/MODE1pin 7Connected to: The microcontroller 50%
  • Series resistor on 42% · 10 Ω (4), 22 Ω (3), 33 Ω (2)
RXD0/MODE0pin 8Connected to: The microcontroller 50%
  • Series resistor on 42% · 10 Ω (4), 22 Ω (3), 33 Ω (2)
VDDIOpin 9Connected to: 3.3V 92%
  • Decoupling capacitor on 79% · 100 nF (29), 10 µF (4), 1 µF (2)
CRS_DV/MODE2pin 11Connected to: The microcontroller 58%
  • Series resistor on 33% · 10 Ω (4), 33 Ω (2), 4.7 kΩ (1)
MDIOpin 12Connected to: The microcontroller 79%
  • Pull-up to 3.3V on 67% · 1.5 kΩ (8), 4.7 kΩ (4), 10 kΩ (2)
INT/REFCLKOpin 14Connected to: Signal 54% · not connected 46%
  • Series resistor on 42% · 33 Ω (8), 4.7 kΩ (1), 22 Ω (1)
RSTpin 15Connected to: The microcontroller 42%
  • Pull-up to 3.3V on 54% · 10 kΩ (10), 4.7 kΩ (1), 12 kΩ (1)
VDD1Apin 19Connected to: A connector 21% · 3.3V 46%
  • Capacitor to GND on 88% · 100 nF (40), 1 µF (4), 10 µF (2)
  • Series resistor on 33% · 49.9 Ω (20)
TXNpin 20Connected to: A connector 79%
  • Series resistor on 46% · 49.9 Ω (9), 50 Ω (1)
TXPpin 21Connected to: A connector 79%
  • Series resistor on 46% · 49.9 Ω (9), 50 Ω (1)
RXNpin 22Connected to: A connector 79%
  • Series resistor on 46% · 49.9 Ω (9), 50 Ω (1)
RXPpin 23Connected to: A connector 79%
  • Series resistor on 46% · 49.9 Ω (9), 50 Ω (1)
RBIASpin 24Connected to: Signal 100%
  • Resistor to GND on 96% · 12.1 kΩ (16), 49.9 Ω (4), 12 kΩ (3)
VSSpin 25Connected to: GND 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smoothiev2-prime by Smoothieware, Pro rev1 by TheRetroWeb, ESP32ETH by nuclearcat and Dc power supply by dc-power-supply.

The LAN8720A in open source designs

The gallery holds 34 open source boards using the LAN8720A from 25 GitHub repositories; a typical one measures about 94.1 × 84.5 mm and carries around 77 components.

69% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Smoothiev2-prime by Smoothieware.

Microcontrollers on boards using the LAN8720A

LAN8720A: common questions

Where can I find a LAN8720A reference design?

Each of the 34 boards on this page is a real design using the LAN8720A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LAN8720A VDDCR pin connected?

The VDDCR pin has a capacitor to GND on 23 of 24 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 24 open source designs using the LAN8720A.

What resistor goes on the LAN8720A RBIAS pin?

The RBIAS pin has a resistor to GND on 23 of 24 designs, most often 12.1 kΩ (then 49.9 Ω). Counted from the KiCad layouts of 24 open source designs using the LAN8720A.

How is the LAN8720A VDD1A pin connected?

The VDD1A pin has a capacitor to GND on 21 of 24 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 24 open source designs using the LAN8720A.

What parts are used alongside the LAN8720A?

The ESP32-WROOM-32, ADM3057ExRW, ESP32-S3-2x22, LM2576HVS-5 and AP63203WU appear in the most repositories here.

Which microcontrollers do boards using the LAN8720A use?

Most are built on ESP32 (25), STM32 (4), FPGA (1) and NXP (1).

How big is a typical board using the LAN8720A?

The median is 94.1 × 84.5 mm, and 69% are two-layer designs.

What is the most popular open source board using the LAN8720A?

By GitHub stars, Smoothiev2-prime by Smoothieware, with 69 stars.

Can I simulate one of these boards using the LAN8720A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part