5 open source boards using the LM2576HVS-12
Real designs built with the LM2576HVS-12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Iskander
M-K-O-Hybrid-open-source
81.5 × 47 mm62 parts2LMIT12STM32
PMSM driver
Mohamed-Ashrf
81.5 × 47 mm62 parts2LMIT2ESP32
Poe32net original
adamjezek98
70 × 90 mm74 parts2LCERN-OHL-P-2.00LM2576HV-BREAKOUT-MOD
NatanaelBimo
39 × 34 mm13 parts2LMIT0Carte Alim
Pokibot-org
98.4 × 66 mm32 parts2LApache-2.00
How designs wire the LM2576HVS-12
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM2576HVS-12 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin has a inductor on 5 of 5 designs, most often 330 µH (then 100 µH).
- The ON/OFF pin is tied to GND on 5 of 5 designs.
- The VIN pin has a decoupling capacitor on 3 of 5 designs, most often 100 µF (then 1 µF).
- The FB pin is tied to 12V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 48V 60% · a signal 40% |
|
| OUTpin 2 | Connected to: Signal 100% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| FBpin 4 | Connected to: 12V 60% · a signal 40% |
|
| ON/OFFpin 5 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iskander by M-K-O-Hybrid-open-source, PMSM driver by Mohamed-Ashrf, Poe32net original by adamjezek98 and LM2576HV-BREAKOUT-MOD by NatanaelBimo.
The LM2576HVS-12 in open source designs
The gallery holds 5 open source boards using the LM2576HVS-12 from 5 GitHub repositories; a typical one measures about 81.5 × 47 mm and carries around 62 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Iskander by M-K-O-Hybrid-open-source.
Parts used alongside the LM2576HVS-12
What boards using the LM2576HVS-12 are built for
LM2576HVS-12: common questions
Where can I find a LM2576HVS-12 reference design?
Each of the 5 boards on this page is a real design using the LM2576HVS-12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM2576HVS-12 OUT pin connected?
The OUT pin has a inductor on 5 of 5 designs, most often 330 µH (then 100 µH). Counted from the KiCad layouts of 5 open source designs using the LM2576HVS-12.
How is the LM2576HVS-12 ON/OFF pin connected?
The ON/OFF pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM2576HVS-12.
What decoupling capacitors do designs use on the LM2576HVS-12 VIN pin?
The VIN pin has a decoupling capacitor on 3 of 5 designs, most often 100 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the LM2576HVS-12.
What parts are used alongside the LM2576HVS-12?
The AMS1117-3.3, DRV8323H and STM32F446RETX appear in the most repositories here.
Which microcontrollers do boards using the LM2576HVS-12 use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the LM2576HVS-12?
The median is 81.5 × 47 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM2576HVS-12?
By GitHub stars, Iskander by M-K-O-Hybrid-open-source, with 12 stars.
Can I simulate one of these boards using the LM2576HVS-12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.