Smart home hub
AdamZatloukal·smart-home-hub·hardware/kitchen-pcb.kicad_pcb
About the Smart home hub PCB
Smart home hub is an open source ESP32 PCB design by AdamZatloukal, published on GitHub. It is a 4-layer board measuring 82.6 × 82.6 mm, with 81 components from 38 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the MX25L3233FM2I-08G, SHT30-DIS-B, USBLC6-2SC6 and NCP1117ST33T3G. By type, the board carries 27 resistors, 19 capacitors, 15 diodes, 9 connectors, 5 ICs and 4 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
ESP32 based smart home hub
Main components on the Smart home hub
Smart home hub bill of materials (BOM)
81 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MX25L3233FM2I-08G | SOIC127P790X216-8N_MX25L3233FM2I-08G | U1 |
| 1 | SHT30-DIS-B | DFN250X250X100-9N | U2 |
| 1 | USBLC6-2SC6 | SOT95P280X145-6N | U3 |
| 1 | NCP1117ST33T3G | SOT230P700X180-4N | U4 |
| 1 | ESP32-S3-WROOM-1-N8R8 | ESP32S3WROOM1N4 | U5 |
| 1 | TEMT6000X01 | TEMT6000X01 | Q1 |
| 1 | MEM2075-00-140-01-A | MEM20750014001A | J1 |
| 1 | CONN_01X06 Conn_01x06 | mic-module | J2 |
| 1 | CONN_02X02_ODD_EVEN Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | S3B-XH-SM4-TB(LF)(SN) S3B-XH-SM4-TB_LF__SN_ | S3BXHSM4TBLFSN | J4 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J5 |
| 1 | DCJ200-10-A-K1-K | BarrelJack_GCT_DCJ200-10-A_Horizontal | J6 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J7 |
| 1 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J8 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | FTSH10501LDVK | J9 |
| 1 | Fuse | FUSC6125X279N | F1 |
| 3 | SW_Push | SW_PUSH_6mm_H9.5mm | SW1, SW2, SW4 |
| 1 | R1966ABLKBLKGR RA1113112R | RA1113112R | SW3 |
| 5 | UCLAMP3301D.TCT | SOD2512X110L | D1, D2, D3, D4, D5 |
| 2 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6, D10 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | BLUE | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | YELLOW | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9 |
| 1 | B320AE-13 | DIONM5226X230N | D11 |
| 1 | SM6T6V8CA | DIONM5436X265N | D12 |
| 1 | NZH5V6B,115 | D_SOD-123F | D13 |
| 1 | TYN612MRG | TS820600B | D14 |
| 1 | B320AE-13 | D_SMA | D15 |
| 11 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C7, C8, C10, C11, C13 +3 |
| 2 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C12 |
| 2 | 22U 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C9 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 3 | 22P 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15, C16 |
| 2 | 50R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3 |
| 10 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5, R6, R7, R8, R15, R17 +2 |
| 9 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R13, R16, R18, R20, R21 +1 |
| 4 | 5K1 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R19, R23 |
| 2 | 50R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25 |
Smart home hub design files
The KiCad project lives in the AdamZatloukal/smart-home-hub repository on GitHub; these links point at the commit this page was built from.
Smart home hub: common questions
What microcontroller does the Smart home hub use?
The Smart home hub is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the Smart home hub PCB?
The Smart home hub measures 82.6 × 82.6 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Smart home hub?
81 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart home hub design files?
From the AdamZatloukal/smart-home-hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart home hub design in my own project?
The repository has no license, so all rights stay with AdamZatloukal. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart home hub without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k