Fiat light relay
About the Fiat light relay PCB
Fiat light relay is an open source PCB design by adeboni, published on GitHub. It is a 2-layer board measuring 52 × 52 mm, with 7 components from 5 distinct parts.
By type, the board carries 3 fuses, 2 connectors and 1 diode.
It belongs with the audio, iot & wireless and sensors designs in this gallery.
From the project
This repository stores code for various electronics projects I've made
This repository stores code for various electronics projects I've made
Wasp Cannon: A wifi-enabled water cannon for shooting water at wasps on my balcony CV Glove: A glove with flex sensors on fingers that output control voltages for eurorack modules Critter Coat: A coat with fluttering butterflies on it AQI Monitor: Simple air quality monitor using a Honeywell HPM sensors Atari Controller: Custom Atari 2600 controller with an analog joystick Camera Remote: Wireless camera shutter control Gas Sensor: A generic MQ gas sensor board with LED indicators PS2 Drone Controller: Lets you control…
Fiat light relay bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X06 Conn_01x06 | SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm_Relief | J4 |
| 1 | CONN_01X01 Conn_01x01 | SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm_Relief | J5 |
| 3 | Fuse | Fuseholder_Blade_Mini_Keystone_3568 | F1, F2, F3 |
| 1 | G2RL-24-DC12 | Relay_DPDT_Omron_G2RL | RL1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
Fiat light relay design files
The KiCad project lives in the adeboni/electronics repository on GitHub; these links point at the commit this page was built from.
Fiat light relay: common questions
How big is the Fiat light relay PCB?
The Fiat light relay measures 52 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fiat light relay?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fiat light relay design files?
From the adeboni/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fiat light relay design in my own project?
The repository has no license, so all rights stay with adeboni. Use it as a reference, and ask the author before reusing the design.
More boards in electronics
RP2040/RP2350Ir receiver
100 × 100 mm84 parts2LNo license0
RP2040/RP2350Ir transmitter
114.3 × 25.4 mm81 parts2LNo license0
Looper
100 × 62 mm63 parts2LNo license0
Alien screamer
50 × 40 mm55 parts2LNo license0
Delay reverb
100 × 42 mm46 parts2LNo license0
Drone tranceiver
85 × 45 mm40 parts2LNo license0
Tape jar
58 × 58 mm28 parts2LNo license0
Aw rachio adapter
23.1 × 51 mm19 parts2LNo license0
AVR/ArduinoDrum trigger adapter
58 × 20 mm7 parts2LNo license0
Dc dc jack converter
30.8 × 12.2 mm5 parts2LNo license0
Tape jar fp
68 × 68 mm3 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k