Tape jar
About the Tape jar PCB
Tape jar is an open source PCB design by adeboni, published on GitHub. It is a 2-layer board measuring 58 × 58 mm, with 28 components from 14 distinct parts.
Other key parts include the TL072 and NE5532. By type, the board carries 13 resistors, 8 capacitors, 3 connectors, 2 ICs and 1 switch.
It belongs with the audio, iot & wireless and sensors designs in this gallery.
From the project
This repository stores code for various electronics projects I've made
This repository stores code for various electronics projects I've made
Wasp Cannon: A wifi-enabled water cannon for shooting water at wasps on my balcony CV Glove: A glove with flex sensors on fingers that output control voltages for eurorack modules Critter Coat: A coat with fluttering butterflies on it AQI Monitor: Simple air quality monitor using a Honeywell HPM sensors Atari Controller: Custom Atari 2600 controller with an analog joystick Camera Remote: Wireless camera shutter control Gas Sensor: A generic MQ gas sensor board with LED indicators PS2 Drone Controller: Lets you control…
Main components on the Tape jar
Tape jar bill of materials (BOM)
28 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | DIP-8_W7.62mm | U1 |
| 1 | NE5532 | DIP-8_W7.62mm | U2 |
| 1 | Battery | SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J1 |
| 2 | AUDIOJACK3 AudioJack3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2, J4 |
| 1 | A10K A10k | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | SW_SPDT | Switch_Toggle_SPDT_Mini_SolderLug | SW1 |
| 1 | 15N 15n | C_Disc_P5.08mm | C1 |
| 4 | 47U 47u | CP_Radial_P2.5mm | C2, C5, C8, C10 |
| 1 | 10N 10n | C_Disc_P5.08mm | C3 |
| 2 | 100N 100n | C_Disc_P5.08mm | C4, C6 |
| 4 | 3.6K 3.6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5, R8, R9 |
| 2 | 200K 200k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 3 | 200 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R10, R11 |
| 4 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7, R12, R13 |
Tape jar design files
The KiCad project lives in the adeboni/electronics repository on GitHub; these links point at the commit this page was built from.
Tape jar: common questions
How big is the Tape jar PCB?
The Tape jar measures 58 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tape jar?
28 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tape jar design files?
From the adeboni/electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tape jar design in my own project?
The repository has no license, so all rights stay with adeboni. Use it as a reference, and ask the author before reusing the design.
More boards in electronics
RP2040/RP2350Ir receiver
100 × 100 mm84 parts2LNo license0
RP2040/RP2350Ir transmitter
114.3 × 25.4 mm81 parts2LNo license0
Looper
100 × 62 mm63 parts2LNo license0
Alien screamer
50 × 40 mm55 parts2LNo license0
Delay reverb
100 × 42 mm46 parts2LNo license0
Drone tranceiver
85 × 45 mm40 parts2LNo license0
Aw rachio adapter
23.1 × 51 mm19 parts2LNo license0
AVR/ArduinoDrum trigger adapter
58 × 20 mm7 parts2LNo license0
Fiat light relay
52 × 52 mm7 parts2LNo license0
Dc dc jack converter
30.8 × 12.2 mm5 parts2LNo license0
Tape jar fp
68 × 68 mm3 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k